Carlo Gavazzi
Level control relay type CLP2FArt. no.: 3864382
Relay for level control of conductive liquids, 11-pins socket connection - broader sensitivity!
The relay is used for regulation of conductive liquids where the level must be between a minimum and maximum value or where a level may not be above or below a maximum. When filling, Fill is selected (left scale] on the lower dial and when emptying, Empty (right scale) is selected. If only one level is desired, for example overfilling or dry running protection, use E38 644 20 and connect the electrodes on plinth 5-7 and bridge 5-6 and 7-11 (master). 7-11 shall always be breached for a system! With a cascade connection/indication of several levels (max 7 relays), refer to the products Swedish datasheet. All relevant data and the circuit diagram are clearly marked next to the relays.
Technical data:
Relay output 1alternating contact, AC1 8 A / 250 VAC (2500 VA)
Sensor voltage max 5 VAC, 2 mA
Sensor sensitivity Mode L (low sensitivity) 250-5kohm, Mode S (standard sensitivity) 50k-500kohm, fine adjustment of the upper potentiometer (the factory setting works in most cases, that is, Mode S and max on the upper potentiometer).
Reaction time approx. 1s
Operating temperature -20º to +50º C
Indication 2 LED, green light when the control voltage is connected, yellow light when the relay is closed.
Dimensions (mm) 36x81x60
