Order lines: 0

Ahlsell ProductsCooling

Cooling

Air conditioning

Liquid cooling unit

Control & monitoring systems

Installation accessories

Pipe and duct systems

Refrigerant, oil and refrigerants & heating media

Service equipment

Solar heating & HVAC accessories

Consumer products KCC

Ready To Install package

Cellular rubber

Are you looking for refrigeration products? Among Ahlsell's cooling products are compressors, cooling units, heat exchangers, air conditioning, heat pumps, liquid cooling units, computer cooling units, control, and monitoring systems, valves, installation accessories, pipe and duct systems, refrigerant, oil, cooling and heating media, service equipment, solar heating, plumbing accessories, and pool heating. We value reliable, long-lasting products. As a result, you can count on us to provide you with only high-quality cooling products. Take a look at the entire range of refrigerators we have in-store or online at in out webshop.

Products (997)

Ground Bracket

Art. no.: 7133080

Vacuum Pump Class A1, A2, A2L & A3

Vacuum Pump Class A1, A2, A2L & A3

Art. no.: 22070067

Pro-Set VPS6DE spark-proof two-stage vacuum pump handles class A1, A2 and A3 cold media.
With gas ballast valve that accelerates the attainment of a deep vacuum. 220-240V 50/60Hz.

Vacuum Pump Class A1, A2, A2L & A3

Vacuum Pump Class A1, A2, A2L & A3

Vacuum Pump Class A1, A2, A2L & A3

Art. no.: 75897861

The new testo 565i vacuum pump performs vacuum extraction of refrigeration systems and heat pumps completely automatically thanks to the connection to the testo 552i vacuum sensor. When the desired vacuum target value is reached, the pumping stops automatically and a vacuum hold test starts simultaneously. This safely removes foreign gases and moisture, and information about the system's tightness is saved. The data logging function ensures complete documentation. This allows vacuum extractions to be carried out entirely independently.

Configuration, monitoring of real-time values, and sending of measurement reports can be easily managed via the free testo Smart App. This makes you flexible and saves valuable time.

For an optimal workflow, the testo 565i automatically establishes a Bluetooth connection to Testo's refrigeration gauges and to the testo Smart App when it is started. The pump also guarantees maximum safety at all times thanks to its compatibility with A2L and A3 refrigerants.

The testo Smart App guides you quickly and easily through measurements on refrigeration, air conditioning, and heating systems.

*Automatic Bluetooth® connection to your mobile and to the testo Smart App
*Preliminary setting for vacuum extraction
*Monitoring of all measurement values and data storage
*Graphical progress display
*Create and send measurement reports

Vacuum Pump Class A1, A2, A2L & A3

R1 Bushing NPT-NPT

R1 Bushing NPT-NPT

Art. no.: 7062485

Reducing bushingR1. External NPT x Internal NPT

Samsung Climate Hub

Samsung Climate Hub

Art. no.: 997082

Samsung Climate Hub is an all-in-one tank that is compatible with both the HT Quiet series and the R290 series.

Should be supplemented with control panel item no. 998632 and an outdoor unit from either the HT Quiet or R290 series.

Dimensions:
Height: 1800mm
Width: 895mm
Depth: 700mm
Weight: 130kg

For more information, see the product sheet.

Backup heater:
200l 2kW
260l 6kW

Rivacold Liquid-cooled Unit R513A / R134a, Fridge

Rivacold Liquid-cooled Unit R513A / R134a, Fridge

Art. no.: 5115813

Water-cooled condensing units The cooling effect is stated at + 42 ° C in condensation, subcooling 2K and 10K suction overheating, + 32 ° C in and + 38 ° C out, 40% propylene glycol and R134a as refrigerant. The units contain compressor, cooling fan, condenser (plate heat exchanger), refrigerant container, safety valve, dual pressure switch with manual reset on HP, extra low pressure switch, water saving valve, drying filter, sight glass and shut-off and service valves.

Temperature Sensor Other - Eliwell

Temperature Sensor Other - Eliwell

Art. no.: SN200000

Press Tool Mini-Press ACC Li-Ion Basic-Pack, Rems

Press Tool Mini-Press ACC Li-Ion Basic-Pack, Rems

Art. no.: 19025173

Battery-powered fully automatic radialpress Li-Ion for pressure connections Ø10-40 mm. Power for REMS press jaws mini. Swivel coupling for press jaws, with automatic locking. Electro-hydraulic drive with a powerful, battery-powered motor 14.4 V, 420 W, robust planetary gear, eccentric reciprocating pump and compact, highly effective hydraulic system, safety switches. Battery Li-Ion 14.4 V 1.3 Ah, quick charger Li-Ion/230 V, 50 – 60 Hz, 65 W.
In a stable metal box.

Press Tool Mini-Press ACC Li-Ion Basic-Pack, Rems

Expander heads

Art. no.: 4230158

Fits expander tools BLACK MAX BTLH5E and BTLE9

U5 Compound nipple flare-NPT

U5 Compound nipple flare-NPT

Art. no.: 7061702

Compound nippleU5. Internal flare x External NPT

Transition Nipple NPT-NPT

Transition Nipple NPT-NPT

Art. no.: 7061650

Reducing changeover nipple. Internal NPT x external NPT.

Digital Pocket Thermometer Fieldpiece

Digital Pocket Thermometer Fieldpiece

Art. no.: 38022105

Engines

Art. no.: 5363200

Oil Pump

Art. no.: 7066670

Oil pipe of the changeable type, fills or drains oil in the compressor. Handles 6 bars pressure and hence can be used when the refrigerating system is operating.

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Art. no.: 3878557

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cell Rubber Insulation HT/Armaflex hoses in length of 2 meters, insulation thickness 13mm (tolerance ± 1.5 mm)

Cell Rubber Insulation HT/Armaflex hoses in length of 2 meters, insulation thickness 13mm (tolerance ± 1.5 mm)

Art. no.: 43204042

Insulation for pipes and tanks with high temperatures as well as with variable temperatures. Flexible insulation material with closed cells. Base of synthetic rubber (elastomer), uv-resistant, oil-resistant Temperature range -50°C - +150 °C. Fire class DL-s3,d0.

Evaporator CO2 - CGS

Evaporator CO2 - CGS

Art. no.: 60074401

Evaporator CO2 - CGS

P77 Low Pressure Switch

Johnson Control

P77 Low Pressure Switch

Art. no.: 7070200

Max. test pressure 22 bar.
Tested and operationally safe pressostats in aluminium housing.

Tube expander

Art. no.: 4230155

Complete tube expander set with nine expander heads in a plastic bag. Each expander head has a specific color to easily see the difference in the different sizes.

Tube expander

Art. no.: 769012265

BLACK MAX BTLH5E pipe expander is a hydraulic pipe expander that makes it very flexible and easy to expand the ends of copper pipes for refrigeration and heat pump installations. This one-handed hydraulic pipe expander allows you to use much less force to expand the pipes, which facilitates your installation. The kit includes a pipe cutter and 5 expander heads in aluminum in different colors that make it easy to distinguish between the different dimensions. More dimensions of expander heads can be purchased if needed.

Insulation Tape Tubolit

Insulation Tape Tubolit

Art. no.: 45200000

Tape for Tubolit.

Cell Rubber Insulation AF/Armaflex AF-2, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Cell Rubber Insulation AF/Armaflex AF-2, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Art. no.: 43812035

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ>10000 High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Armaflex/Ultima cell rubber insulation, plates in rollers, unglued

Armaflex/Ultima cell rubber insulation, plates in rollers, unglued

Art. no.: 19059845

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration.
Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ >7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1, d0.
Temperature range -50°C - +110 °C. When installed outdoors, the Ultima dark must be covered to protect it from UV radiation; this should also be done indoors if needed.

Armaflex/Ultima cell rubber insulation, plates in rollers, pre-glued

Armaflex/Ultima cell rubber insulation, plates in rollers, pre-glued

Art. no.: 19059844

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration.
Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ >7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1, d0.
Temperature range -50°C - +110 °C. When installed outdoors, the Ultima dark must be covered to protect it from UV radiation; this should also be done indoors if needed.

Cellular rubber insulation in plates AF/Armaflex, un glued

Cellular rubber insulation in plates AF/Armaflex, un glued

Art. no.: 43506000

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50 - +110°C (completely glued only +85°C). Type approval 03391/82: Outer layer class II (Fire class B-S3-D0). Tg 3176/83: Pipe bushings
Delivered with the measurements 2000x500mm

U3 Compound nipple flare-NPT

U3 Compound nipple flare-NPT

Art. no.: 7061700

Compound nipple U3.U External flare x Internal flare NPT

Rivacold Liquid-cooled Unit R452A / R404A, Freezer

Rivacold Liquid-cooled Unit R452A / R404A, Freezer

Art. no.: 5115815

Water-cooled condensing units The cooling effect is stated at + 42 ° C in condensation, subcooling 2K and 10K suction overheating, + 32 ° C in and + 38 ° C out, 40% propylene glycol and R452A as refrigerant. The units contain compressor, cooling fan, condenser (plate heat exchanger), refrigerant container, safety valve, dual pressure switch with manual reset on HP, extra low pressure switch, water saving valve, drying filter, sight glass and shut-off and service valves.

Vacuum Pump Oil Refco

Vacuum Pump Oil Refco

Art. no.: 7068065

Special oil for vacuum pumps.

Vacuum Pump Oil Refco

Panel thermostats including 1 PCs NTC sensor-AKO

Panel thermostats including 1 PCs NTC sensor-AKO

Art. no.: 7170469

*Communication via RS485 Modbus RTU.

Accessories for ECH 200/400 and ST500

Accessories for ECH 200/400 and ST500

Art. no.: 7182023

NTC Sensor - Eliwell

NTC Sensor - Eliwell

Art. no.: 35345047

NTC Sensor - AKO

NTC Sensor - AKO

Art. no.: 7170054

Suitable for both AKO and Eliwell

NTC Sensor - AKO

NTC Sensor - AKO

AKS 12

Art. no.: 40009392

Air temperature sensor with average temperature range and average time constant

NTC Sensor - Alco

NTC Sensor - Alco

Art. no.: 7070063

NTC Sensor - Alco

Electronic Vacuum Meter REFVAC-RC

Electronic Vacuum Meter REFVAC-RC

Art. no.: 7066729

REFVAC-RC is a digital vacuum meter for vacuum suction of cooling systems and heat pumps. This vacuum meter is very accurate and starts to show values from atmospheric pressure down to 0 millibars. Via a Bluetooth interface, REFVAC-RC can connect to the Refmesh app on your smartphone or tablet If you have Refco's digital manometer stand Refmate, you can also connect REFVAC-RC to this. This makes it possible to monitor the absolute pressure value obtained during vacuum suction conveniently and wirelessly. In addition, the measurement results can be quickly documented in the app and sent by e-mail. the construction makes it ideal for daily use and protects it from dirt and water. Flexible power supply with either 3 AAA batteries or USB connected to a power bank. Battery life: 100 hours. REFVAC-RC has a range of 100 meters.

Electronic Vacuum gauge Fieldpiece

Electronic Vacuum gauge Fieldpiece

Art. no.: 38022104

Electronic Vacuum Meter Class 0.2 with Calibration Certificate

Electronic Vacuum Meter Class 0.2 with Calibration Certificate

Art. no.: 7066484

LEO 1 year, a microprocessor-controlled, exact and multi-sided digital pressure-measuring instrument with integrated quick max- and min-pressure function.

Electronic Vacuum Meter VG200W

Electronic Vacuum Meter VG200W

Art. no.: 7066459

CPS electronic vacuum meter VG200W is a high-precision digital vacuum meter that provides accurate vacuum measurements when vacuuming heat pumps, air conditioners and cooling and freezing systems. A pressure between atmospheric pressure and 0 microns can either be read on the 5-digit screen on the vacuum meter or via Bluetooth on the mobile through the free CPS Link app. The CPS Link app has several useful functions that facilitate your work, such as a logging function, geographical location, the ability to save jobs for different customers and set high and low pressure alarms and more. Other advantages of the VG200W are that it has an advanced sensor with automatic temperature compensation that can be cleaned in the field. T-adapter in stainless steel, hanging hook and bag included. Powered by a 9V alkaline battery and can handle 20 hours of continuous operation.

High Pressure Switch

High Pressure Switch

Art. no.: 3001731

ACB cartridge pressostats are pressure monitors with a small membrane to be used in cooling- and air- conditioning systems. ACB are equipped as a standard with a 6A contact system with automatic or manual reset. ACB is sturdy and safe to use and its small size and low weight means that it can be installed directly into cooling systems in which pressure needs to be monitored. ACB is available in many different versions with different pressure settings and pressure connections.
Solid difference. Cable 1.5 m. IP65

CROT/CRO Startregulator

CROT/CRO Startregulator

Art. no.: 7008550

Mineral Oil Mobile Gargoyle Arctic

Mineral Oil Mobile Gargoyle Arctic

Art. no.: 7068045

Mineral oil for broad range of uses in different cooling systems. Viscosity is given for +40°C.

UV lamp for Leak Detection

UV lamp for Leak Detection

Art. no.: 24068026

Spectroline Optimax 3000 is a starter kit that features equipment to be used for finding leaks in the refrigerant system, with fluorescent tracer substance. Start kit consists of a battery-powered UV lamp FL-100/12, eyeglasses, a rechargeable battery and a battery charger.

Ethylene Glycol EarthCare Conc .with Corrosion Inhibitor

Ethylene Glycol EarthCare Conc .with Corrosion Inhibitor

Art. no.: 471374

EarthCare Monoethylene glycol is formulated on a recycled glycol, which means an environmental advantage in the form of reduction of CO 2 emissions compared to a product that is not based on recycled raw material (calculated by RISE). It is available as a concentrate to ready-mixed 30%. Assessed by both Byggvarubedömningen and Sunda Hus. EarthCare Monoethylene glycol has a wide range of uses that provide long-term protection, reduced viscosity, increased heat capacity and thermal conductivity below the freezing point. Added corrosion inhibitor is nitrite, amine, phosphate, borax and silicate free which makes it gentle on pumps and compatible with most metals in pipelines. EarthCare Monoethylene glycol is an uncoloured product, as paint additives are not environmentally friendly. This product is designed to be used for all real estate and process applications. Closed cooling and heat recovery systems and industrial process cooling. Used product regardless of make, can be handed over to Recyctec at handling cost to enable continued reuse. Contact order@recyctec.se or 010-209 00 28. See symbol for product sheet for more detailed product information.

Schrader Needle CO2

Schrader Needle CO2

Art. no.: 17013171

Polyolester Oil Emkarate CO₂

Polyolester Oil Emkarate CO₂

Art. no.: 4221782

Emkarate RL68HB is an ISO VG 68 synthetic polyol cholesterol specifically designed for use in CO₂ plants. It provides effective protection against wear and improves service life and efficiency. It withstands high temperatures and is chemically and thermally stable.

Test Coil

Art. no.: 4196318

Permanent magnet

Pool Heating KMP SMART

Pool Heating KMP SMART

Art. no.: 7160966

Make the most of your pool with an efficient and smart pool heat pump from KMP KMP SMART is a highly efficient inverter-controlled pool heat pump with built-in wifi control and the climate-smart refrigerant R32 that reduces the impact on the greenhouse effect. KMP SMART can reduce your heating costs by up to 80%. The pump is elegantly designed, adapted to the Scandinavian climate and provides a nice warmth even on a cloudy summer day. KMP has previously tested its pool pumps at SP with very good results. Recommended fuse SMART 7: 10A, SMART 12: 13A. Refrigerant R32A. 220-240V / 1phase / 50Hz Recommended fuse SMART 16: 3x13A, SMART 20: 3x13A. Refrigerant R32A. 380-400V / 3phase / 50Hz Practical winter blanket, two 50mm union couplings in PVC for gluing and 4 vibration cushions are included with the heat pump. Imagine being able to regulate your pool via your mobile phone - with KMP it's a possibility! Through our built-in Wi-Fi module and use our specially developed app, you get the freedom to remotely control your pool heater locally or via the Internet. Recommended pool volume: SMART 7 18-36 Cubic Meters SMART 12 30-60 Cubic Meters SMART 16 40-75 Cubic Meters SMART 20 50-95 Cubic Meter

Spare Parts Innova H

Spare Parts Innova H

Art. no.: 7145412

Spare parts for the Innova H series

Spare Parts Innova H

Spare Parts Innova H

Spare Parts Innova H

Spare Parts Innova H

Spare Parts Innova H

Spare Parts Innova

Spare Parts Innova

Art. no.: 7131346

Spare parts Innova

Chiller / Heat Pump Control - Eliwell

Chiller / Heat Pump Control - Eliwell

Art. no.: 7182040

The main elements in the new Energy ST range are easy
installation and use: all of the most important functions in the user interface can
be activated by four buttons
The four-digit screen with 18 icons (of which seven can be configured) offers clear readability.
With the help of just four buttons it is possible to change the screen. select operating mode, activate manual defrosting, turn the regulator on/off and navigate menus in ordered folders.
Access to folders and parameters can be configured using three different levels: end-user, service and manufacturer.

Vibration Dampers

Vibration Dampers

Art. no.: 7133086

Vibration damper in the rubber shock absorption, suitable for air-source heat pumps and less split unit.

7133086 Kit of 4, M8 bolt L=20mm, rubber H=19mm W=30mm. Including the nuts and washers. -20°C
7145582 M8 bolt L=20mm, rubber H=30mm W=30mm. Excluding the nuts and washers. -20°C

Sample Printing Equipment

Sample Printing Equipment

Art. no.: 4230727

High-quality anti-printing equipment developed by the Swedish manometer factory. Intended for test pressure up to 54.5 bar. Content: Valve block Manometer 0-80 Bar, class 1.0 with rubber cover, suspension hook and connection 1/4 "" flare 2 safety valves, adjustable 30-60 bar Drain valve 1/4 "" flare Check valve Filling hoses 2x2m (700bar) with safety wires Everything packed in a sturdy bag 455x355x160 mm Connects to nitrogen regulator art no. 4230731 (not included).

‌
‌
‌
‌
‌
‌
‌
‌

Showing 52 of 997