Ahlsell
Order lines: 0
Quick order
AhlsellProductsCooling

Cooling

Compressors
Cooling units
Heat exchanger
Air conditioning
Heat pumps
Liquid cooling unit
Control & monitoring systems
Valves
Installation accessories
Pipe and duct systems
Refrigerant, oil and refrigerants & heating media
Service equipment
Solar heating & HVAC accessories
Pool heating
Consumer products KCC
Ready To Install package
Cellular rubber

Are you looking for refrigeration products? Among Ahlsell's cooling products are compressors, cooling units, heat exchangers, air conditioning, heat pumps, liquid cooling units, computer cooling units, control, and monitoring systems, valves, installation accessories, pipe and duct systems, refrigerant, oil, cooling and heating media, service equipment, solar heating, plumbing accessories, and pool heating. We value reliable, long-lasting products. As a result, you can count on us to provide you with only high-quality cooling products. Take a look at the entire range of refrigerators we have in-store or online at in out webshop.

D-Tek Stratus Electronic Leak Detector with Infrared Sensor
Inficon
D-Tek Stratus Electronic Leak Detector with Infrared Sensor
Art. no.: 7070191
D-TEK Stratus is the top model of Inficon's electronic leak detector that makes it easier than ever to find refrigerant leaks of all kinds in no time. D-TEK Stratus has two modes, a Cloud Hunting mode and a pinpoint mode. The Cloud Hunter mode is optimal to use in rooms with a lot of refrigerant gas in the air by showing the concentration of refrigerant gas in ppm on the leak detector's large color display.The closer you get to the source of the leak, the higher the concentration is displayed. The pinpoint mode is optimal to use when you are close to the leakage point as the leak detector in the classic way alerts for leakage with a color scale from green to red and a ticking sound with a frequency that indicates the concentration of the refrigerant gas. Switch between automatic and manual reset. The D-TEK Stratus has a newly developed IR sensor with the longest durability on the market that is easy to replace. Comes with lithium-ion battery, AC charger, DC charger for car, spare filter, IR sensor, headphones, extra long probe and impact-resistant bag.
Control Units ALCO EXV
Control Units ALCO EXV
Art. no.: 41003160
EXD-SH1 / 2 is a stand-alone universal control for overheating and temperature control of air conditioners or cooling systems. EXD-SH1: Control of a valve EXD-SH2: Control of two valves in two independent circuits Suction pressure limitation (MOP), low pressure monitor, antifreeze protection and manual valve operation Self-adjusting overheating control function in combination with Emerson EX4-8 and FX5-9 series For several refrigerants, including low temperature R23 refrigerant (ECN-Z60 only) Modbus (RTU) communication Integrated keyboard with two-row display Monitoring of sensors and line faults in stepper motor (ECN / PT5) Optional upload / download key (accessory) for transferring parameter settings between controllers with the same setting Low / high overheating alarm and other function alarms Electrical connection via plug-in screw terminals included with control unit and Micro Molex EXD-M03 (must be ordered separately); Possibility of mounting on DIN rail
Control Valve AKVP
Danfoss
Control Valve AKVP
Art. no.: 068F5210
AKV 10P is a new range of electric expansion valves with improved function, by reducing the pulse rate and amplitude of the installation while maintaining the capacity range for all common refrigerants, including CO2, increases. In addition, the number of valves will be reduced by combining the specifications for AKV and AKVH (CO2 version) in one valve. Connection 3/8 "" - 1/2 "" solder The valve is delivered without coil. For the valves there is a complete accessory program as follows: • Separate coil with connection box or cable • Spare parts in the form of top, nozzle and filter The capacity of the valve is indicated by a number that is included in the type designation. The number represents the size of the nozzle in the current valve. A valve with nozzle number 3 will for example be indicated as AKVP 10-3. Dysan however, is interchangeable as needed. Power data as follows Liquid temperature: 5.3 C Subcooling: 2 K Evaporation refrigerator: -10 C Evaporation freezer: -30 C Overheating: 8 K
Propylene Glycol EarthCare Conc m Corrosion Inhibitor
Propylene Glycol EarthCare Conc m Corrosion Inhibitor
Art. no.: 471375
EarthCare Monopropylene glycol is formulated on a recycled glycol, which means an environmental advantage in the form of reduction of CO 2 emissions compared to a product that is not based on recycled raw material (calculated by RISE). It is available as a concentrate to ready-mixed 30%. Assessed by both Byggvarubedömningen and Sunda Hus. EarthCare Monopropylene Glycol is compatible with most metals except zinc. The hot heat transfer fluid can dissolve zinc and should therefore not be used in galvanized pipelines. EarthCare Monopropylene Glycol has a wide range of uses and provides long-lasting protection with high performance. Added corrosion inhibitor is nitrite, amine, phosphate, borax and silicate free which makes it gentle on pipelines and pumps. EarthCare Monopropylene glycol is an uncoloured product, as paint additives are not environmentally friendly. This product is designed to be used for all real estate and process applications. Air conditioning (HVAC), cooling and heat recovery systems, geothermal and rock heating, sprinkler systems and solar panels, but can also be used in secondary cooling systems for leisure facilities such as ice rinks and solar panels. Monopropylene glycol is low toxic, which makes it suitable for use in the food industry in the above-mentioned plants. Used glycol, regardless of make, can be handed over to Recyctec at handling cost to enable continued reuse. Contact order@recyctec.se or 010-209 00 28. See symbol for product sheet for more detailed product information.
Copeland ZX Scroll Unit Fridge
Copeland
Copeland ZX Scroll Unit Fridge
Art. no.: 7161012
Future-proof your site with the help of the new generation of Copeland EazyCool ™ ZX chillers.
At present the unit is approved for R404A, R134a, R513A, R449A, R448A, R407A & R407F. More refrigerant will come in the future.
The new innovative control system gives you full control on whole process such as floating liquefaction and night securing of the fans.
Go to link up with Modbus RTU for remote control and monitoring.
The new design makes the unit blend well into the environment.
All units are fully equipped from the outset with viewing window, drying filter, tank, variable fan control and crankcase heater.
Built-in protections for overcurrent, phase sequence and unbalance between phases via the electronic control system.
The ability to control a cold room via the inbuilt governance that has outputs for defrosting, fan and a solenoid valve.

All data specified at the following temperatures and R449A as refrigerant

Ambient temperature +32°C
Evaporation -10°C
Suction line temperature 20°C
Audio data according to ISO3744 @10m (Night-Day)
Pipes Shiny 5 m, Thick Wall - Cupori 221
Cupori
Pipes Shiny 5 m, Thick Wall - Cupori 221
Art. no.: 7120590
Cupori 221 Ref Cooling Cup tubes are designed for a working pressure of 80 bar and meet the standard EN 12735-1. The tube is easy to bend and easy to install. Cupori 221 Ref is an installation pipe for store cooling with CO2 as freeze buffer. The pipe ends are sealed after the pipes have been cleaned internally. Fittings of K65 can be used for installation. Condition: Hard. Delivery form: Straight lengths:

The maximum permitted internal working pressure of the pipes is nominal and based on calculations of technical instructions of DKI 1/99. In the calculation, the max. working pressure was calculated from a soft annealed copper tube with Rm = 200 N/mm2 with a safety factor of 3.5 and the working temperature is at + 20° C. The calculation only includes the copper pipe, not couplings.
D-TEK 3
Inficon
D-TEK 3
Art. no.: 22070930
D-TEK 3 has the same proven features as all D-TEK leak detectors, but shortens service life thanks to new functions. Fast sensor changes, a lithium-ion battery with fast charging and ergonomic design make D-TEK 3 a versatile tool for daily leak detection during repair and maintenance In addition, you get two tools in one by purchasing an additional sensor. If you have D-tek 3, you can buy a CO2 sensor 724-701-G2 to also leak CO2. If you have D-tek 3 CO2, you can buy a refrigerant sensor 724-701-G1 to be able to leak other refrigerants. Upgrade your toolbox with this accurate and reliable leak detector. Comes with impact-resistant case, Lithiumion battery, AC charger, DC charger for car, filter, sensor, headphones and maintenance journal. Certificate: CE, SAEJ2791, SAEJ2913, EN14624: 2012, A2L certified
Fan cone vector ICKCW Innova
Innova
Fan cone vector ICKCW Innova
Art. no.: 7128009
4-way air exhaust
four fan speeds and automatic settings
Special high-efficiency plates
Horizontal air foil
Infrared (IR) remote control with real time timer
Built-in water condensation pump, maximum lifting height 1 m from the bottom edge of the cassette.
If there is an outlet for a water control valve,230V. a water valve is not included.
Condensation water connection 25 mm, connection voltage 230/1/50.
Cooling output indicated at max. fan speed, water temperature +7 °C/+12 °C, air in +27 °C dry bulb and 19 °V wet bulb and 50% relative humidity.
Heat output indicated at max. fan speed and water in + 60 °C, + 21 °C dry bulb and 50% relative humidity.
Noise level pertains to maximum speed.

Delivered without the front panel, select a panel as follows:
Panel 7128068 fits ICKCW092.
Panel 7128070 fits ICKCW 161-481
Showing 52 of 1012