Order lines: 0

Ahlsell Products Consumables Chemical technology and hygiene AdhesiveTechnical adhesive

Technical adhesive

Ahlsell helps you find the right product for your work. Our range of chemical and hygiene products includes, among other things, joint and sealing compounds, fireproofing, cleaning agents, glues, lubricants, cutting fluids, paint, solvents, disinfectants, and soap. Explore our wide selection here or visit your nearest Ahlsell store.

Thread seal loctite 577 plumb

Thread seal loctite 577 plumb

Art. no.: 4095067

Gas, oil and plumbing sealing. Not poisonous. Does not crack. Does not shrink. Does not block up valves or pressure gauges. Resists vibrations. For town gas, LPG, plumbing installations and most liquids. Hazard labelling: irritant. Tested for 350 bar.

Glue cyanoacrylat loctite 3090

Glue cyanoacrylat loctite 3090

Art. no.: 308249

Two-component adhesive with good gap filling up to 5 mm. All-round adhesive with drip-free formula. Allows application on vertical surfaces and ceilings. The activator provides full control over the cure time and activates product cure within defined time frames regardless of temperature, humidity, etc. Excellent adhesion on a wide variety of substrates such as metals, most plastics such as PVC, ABS, PC and PBT, rubber, porous / absorbent materials such as wood, paper, cardboard, leather and fabric. Delivered in a practical package with syringe. Precise and clean application with the static mixer that provides controlled mixing ratio. Hazard labelling: irritant.

Thread sealing loctite 5400

Thread sealing loctite 5400

Art. no.: 318027

Loctite® thread sealant 5400 ACC SFDN. Strength: Medium. Operating temperature: Up to 150 degrees. Colour: yellow 50 ml.

Flange seal loctite 5800

Flange seal loctite 5800

Art. no.: 419401

Loctite® flange sealant 5800 ACC SFDN.

Flange seal loctite 5800

Flange seal loctite 574 25ml

Flange seal loctite 574 25ml

Art. no.: 180041

Replaces cut gaskets on plane and polished surfaces. For pumps, thermostats, oil trays, valve covers, engine blocks, gearboxes, etc. Excellent chemical resistance. Max gap-filling 0.5 mm. Can be pressurised after 15 minutes. Not skin-forming. Hazard labelling: irritant.

Flange seal loctite 574 25ml

Glue snabbepoxy loctite 3430

Glue snabbepoxy loctite 3430

Art. no.: 4051296

Two-component adhesive that glues most materials. The small double injector automatically gives the right mixture ratios. Recommended for smaller repair work. Hazard labelling: 3430 = Component A: irritant. Contains: epoxy compound. Hazard labelling component B: irritant, environment dangerous.

Glue snabbepoxy loctite 3430

Glue rapid epoxi dana 332

Glue rapid epoxi dana 332

Art. no.: 317971

Extra strong and durable two-component epoxy adhesive for gluing of, for example, metal, wood, glass, ceramics, leather, rubber, different types of plastic. The glue joint is water-tight and resistant to most solvents. Hazard labelling Irritant, Dangerous for environment.

Glue rapid dana 335

Glue rapid dana 335

Art. no.: 317972

Fast hardening transparent two-component epoxy adhesive for gluing of metal, wood, glass, ceramics, leather, rubber, different types of plastic. After hardening, the adhesive resembles metal and can be sanded and repainted. 24 ml. Hazard labelling Irritant, Dangerous for environment.

Glue dana 351 5gram

Glue dana 351 5gram

Art. no.: 471213

Super glue for materials such as wood, rubber, textiles, metal, leather and more. Transparent. 1-component fast hardening cyano acrylic adhesive.

Glue super attak loctite

Glue super attak loctite

Art. no.: 471126

Liquid, all-round super glue based on alkyl cyanoacrylate. Suitable for porcelain, wood, leather, metal, rubber, cardboard and most plastics. Adheres in seconds. Hazard labelling; irritating.

Glue cyanoacrylat loctite 401

Glue cyanoacrylat loctite 401

Art. no.: 175219

Clear superglue. Very fast setting time. For porous materials such as wood, paper and cork. Also good for viewing metal, plastic and rubber. Hazard labelling: irritant. Contains cyanoacrylate.

Glue cyanoacrylat loctite 401

Glue cyanoacrylat loctite 401

Glue cyanoacrylat loctite 401

Glue cyanoacrylat loctite 435

Glue cyanoacrylat loctite 435

Art. no.: 419338

A reinforced super glue for plastic, rubber and metal. Surface sensitive, adheres extremely well on porous and alkaline surfaces. Low viscosity. Hazard labelling: irritant. Contains cyanoacrylate.

Glue cyanoacrylat loctite 435

Glue cyanoacrylat loctite 460

Glue cyanoacrylat loctite 460

Art. no.: 419333

Loctite® 460 - Odourless super glue that minimises the risk for whitening around the glue joint. Hazardous marking: contains cyanoacrylate.

Glue cyanoacrylat loctite 4850

Glue cyanoacrylat loctite 4850

Art. no.: 419339

Flexible super glue 4850. Specially made for gluing of flexible materials. All-purpose adhesive. Medium viscosity, fast hardening, transparent adhesive. Suitable for assembly and repair of flexible materials and components. Hazard labelling: irritant. Contains cyanoacrylate.

Glue cyanoacrylat loctite 4850

Glue cyanoacrylat loctite 495

Glue cyanoacrylat loctite 495

Art. no.: 419337

One-component, fast hardening for rubber and most plastics. Fixing time 1 minute. Maximum gap-filling 0.05 mm. Hazardous marking: irritating contains: cyanoacrylate.

Glue cyanoacrylat loctite 496

Glue cyanoacrylat loctite 496

Art. no.: 419335

One-component, extremely fast hardening for metal/metal or metal/rubber. High chemical resistance. Max gap-filling 0.25 mm. Hazardous marking: irritating contains: cyanoacrylate.

Glue cyanoacrylat loctite 496

Glue cyanoacrylat loctite

Glue cyanoacrylat loctite

Art. no.: 419331

Very fast hardening and easy-flowing. Glues plastic and rubber including fatty plastics like PE, PP, Teflon, silicon rubber and more when it is used together with the primer 770 (art. 153208). Hazard labelling: irritant. Contains cyanoacrylate.

Glue cyanoacrylat loctite

Glue cyanoacrylat loctite 415

Glue cyanoacrylat loctite 415

Art. no.: 419336

One-component, fast hardening for plastics, metals and less porous surfaces. High impact resistance and high resistance to solvents. Fixing time 1 minute on steel. Tensile strength 3 hours 20N/mm². Padding maximum 0.2 mm. Hazardous marking: irritant contains cyanoacrylate.

Glue cyanoacrylat loctite 415

Thread locking loctite 222

Thread locking loctite 222

Art. no.: 158146

Recommended for weak locking of threaded joints, especially for non-iron metals such as aluminium, brass and other copper-based metals that otherwise can break when being disassembled. Hazard labelling: irritant.

Thread locking loctite 222

Thread lock loctite 243

Thread lock loctite 243

Art. no.: 153201

Medium strong thread locking for metals including steel, brass and black oxidised screws. Prevents loosening from vibration on, for example, pumps, motors and gearboxes. Recommended when disassembly with hand tools is necessary and when the parts are slightly oily. Loctite® 243 = Hazard labelling: irritant. Max gap-filling 0.25 mm.

Thread lock loctite 243

Thread lock loctite 243

Thread lock loctite 243

Thread lock loctite 270

Thread lock loctite 270

Art. no.: 101768

Strong (permanent) thread locking. For threaded joints in metal for example stainless steel where disassembly for maintenance work is not necessary. Also recommended for permanent locking of screws and nuts in, for example, engine blocks. Suitable for all threaded joints in metal, amongst others, stainless steel, aluminium, plated surfaces and chrome-free coatings. Can handle smaller mixtures of industrial oils, e.g. machine oil, corrosion oil and cutting liquid. Ideal for permanently locking bolts on engine blocks and pump housings. Suitable when it is not necessary to regularly disassemble for maintenance. Hazard labelling: irritant. Loctite 2700: Market leaders when it comes to health and safety. No risk symbols, risk or safety phrases. White safety data sheet. Hardened product that has excellent chemical and thermal stabiliity.

Thread lock loctite 270

Thread lock loctite 270

Thread locking loctite 275

Thread locking loctite 275

Art. no.: 180021T

High viscosity. Green and viscous paste. For strong locking and sealing of studs, nuts and screws. Labelling: harmful to health.

Thread seal loctite 542

Thread seal loctite 542

Art. no.: 105173

For sealing of hydraulic and pneumatic connections up to 20 mm (3/4") and small pipe threads. Does not block up valves or filters. For machine tools and mobile systems. Quick sealing against low pressure: 20% strength after 8 minutes on steel parts. Maximum sealing pressure after 24 hours over 350 bar. Maximum gap-filling 0.25 mm. Approved for drinking water. Labelling: harmful to health.

Thread seal loctite 542

Thread seal loctite 542

Thread seal loctite 572

Thread seal loctite 572

Art. no.: 101771

For sealing of threaded joints up to 50 mm. Low strength for easy disassembly. Does not block up valves or filters. For machine tools and mobile systems. Max. sealing pressure after 24 hours over 350 bar. Max gap-filling 0.25 mm. White, with Teflon for good lubrication during assembly. Hazard labelling: irritant.

Thread seal loctite 577

Thread seal loctite 577

Art. no.: 4051200

For sealing of large pipe threads. Seals against low pressure directly after assembly of the parts. Replaces flax, paste and millimetre. Quick sealing against low pressure: 20% strength after 8 minutes on steel parts. Maximum sealing pressure after 24 hours over 350 bar. Maximum gap-filling 0.8 mm. Approved for drinking water NSF. Hazard labelling: irritant.

Thread seal loctite 577

Thread sealing loctite 5331

Thread sealing loctite 5331

Art. no.: 462077

Hardening gel. Recommended for use on threaded plastic or plastic/metal fixing elements in contact with hot or cold water, for example pipe or drainage systems in plastic in industry or agriculture. Temperature resistance: +150^oC. NSF. Approved for drinking water by WRC up to 85^oC.

Thread sealing loctite 5331

Glue loctite 601

Glue loctite 601

Art. no.: 101769

For glueing of cylindrical metal parts with good fitting (up to 0.1 mm). Tested and approved by leading bearing manufacturers. Max operating temperature 150ºC. Hazard labelling: irritant.

Glue loctite 603

Glue loctite 603

Art. no.: 153212

Metal adhesive for fixing cylindrical details with little play. Tolerant to oil. Typical applications are, e.g. rotors axles bushings and pulleys. Seals and prevents fitting corrosion. Fixing time 30 minutes on steel fittings. Max gap-filling 0.10 mm. NSF. Hazard labelling: irritant.

Glue cuff loctite 648 sfdn

Glue cuff loctite 648 sfdn

Art. no.: 377216

For blowing of cylindrical bandages with glide fitting or grip fitting where the temperature can reach + 175° C. Max gap-filling 0.15 mm. Hazard labelling: irritant.

Glue loctite 641

Glue loctite 641

Art. no.: 101770

A medium strong attachment of rolling bearings, cylinder linings, bushes, wages and splines. Increases safety in gliding and easy interference seals. Seals and prevents fitting corrosion. For parts that require regular disassembly such as bearings on axles and in bearing housings. Max gap-filling 0.15 mm. Labelling: harmful to health.

Glue cyanoacrylat loctite 480

Glue cyanoacrylat loctite 480

Art. no.: 148942

Loctite® 480 is a tough, impact-resistant and rubber-reinforced super glue. Black. Withstands 100°C. Hazardous marking: irritating, contains cyanoacrylate.

Glue cyanoacrylat loctite 424

Glue cyanoacrylat loctite 424

Art. no.: 419334

Glues most plastics. For elastomers and rubber, including EPDM, NBR, SBR, Nitrile. For difficult to glue plastics such as PP, PTFE, thermoplastic rubber or silicone rubber together with Loctite Polyolefin Primer. Hazard labelling: irritant

Glue cyanoacrylat loctite 424

Flange seal loctite 510

Flange seal loctite 510

Art. no.: 419364

Thread sealant of still flanges. Recommended for applications where high temperature and chemical resistance is required. P1 NSF reg. No. 123007. Hazard labelling Irritant, Dangerous for environment.

Flange seal loctite 510

Glue cuff loctite 638

Glue cuff loctite 638

Art. no.: 377215

Strong cylindrical attachment. Universal. Fast curing.

LOCTITE 638 is designed for gluing cylindrical mounting components, especially where the joints can be as large as 0.25 mm. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It works on both active metals and passive surfaces, with excellent curing properties. This product has excellent high temperature properties and oil resistance, and is resistant to surface contamination.

The advantages:
High temperature resistance.
Resistant to contamination, including industrial oils.
High strength properties on all metals, including passive materials (such as stainless steel).
Ideal for axles, gears, pulleys, and similar cylindrical parts.
P1 NSF reg. no.: 123010
DVGW approval (EN 751-1): NG-5146AR0619
WRAS approved (BS 6920): 0511518

Glue cuff loctite 638

Quick Super Glue brush on

Quick Super Glue brush on

Art. no.: 471124

Easily separated, highly effective glue, perfect for photos, paper, cardboard etc. Superb for large, horizontal surfaces. Water resistant.

a flask with a cap with a brush attached.. 5 grams.

Spray glue 3M Scotch-Weld 90 strong

Spray glue 3M Scotch-Weld 90 strong

Art. no.: 186099

Aerosol 90, Scotch-Weld, is a quick drying glue with high bonding strength
Strong adhesive spray from 3M. Permanent. 500ml

3M Scotch-Weld aerosol 90 is used for applications requiring high initial strength, quick drying and strong ultimate strength. Can, in certain situations, be compared to contact adhesive. Spray glue 90 from 3M has excellent resistance against water and has a good aging resistance.

Spray glue 3M Scotch-Weld 90 strong

Activator for T2000 and T4000

Activator for T2000 and T4000

Art. no.: 377125

Activator for T2000 and T4000. 150 ml.

Thread lock 242

Thread lock 242

Art. no.: 377253

Medium strength, medium viscosity thixotropic threadlocking adhesive for metal thread sizes up to M36.

LOCTITE 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive for general use. has short fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools.

The advantages:
Medium-high strength
Medium High viscosity.
Quick Fixture time
Thixotropic to reduce adhesive migration

Flange seal Loctite 518

Flange seal Loctite 518

Art. no.: 153202

Gasket product - excellent oil resistance. Ideal for use on stiff iron, steel, and aluminium flanges. They have very good chemical resistance and will not shrink, dent, deform, or age.

LOCTITE 518 is a medium-high strength sealant that hardens without air contact between tightly joined metal surfaces. Ordinary work includes sealing of tightly joined seams between stiff surfaces and flanges of metal. Provides durability at low temperatures immediately after the flanges are mounted. Commonly used as a formed-in-place gasket on stiff flange couplings, e.g. in gearboxes and machine housings.

Your benefits
Anaerobic flange gasket with medium-high strength.
Excellent resistance to oil, water, and glycol
Immediately after the flanges are mounted, the seal is sufficient to resist low pressure
For metal flanges.
Adjusts to unevenness and dents up to 0.25 mm on the flange surfaces.
Gel-like consistency.
Excellent resistance to oil, water, and glycol
Immediately after the flanges are mounted, the seal is sufficient to resist low pressure
P1 NSF reg. no.: 123758

Application areas:
LOCTITE flange seal for medium-strong to strong bonds
Ideal for work on overhead and vertical surfaces (drop-free) and work above the head

Maximum column width - 0.5 mm

Cyanoacrylate adhesive Loctite 454

Cyanoacrylate adhesive Loctite 454

Art. no.: 233908

Instant adhesive - universal gel. Drip-free. Ideal for use on undersides and vertical surfaces.
(Also known as Loctite 454 Prism Instant Adhesive Gel )

LOCTITE 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and rubbers. The gel consistency means that the adhesive can be applied vertically and on undersides. LOCTITE 454 is also suitable for gluing of porous materials such as wood, paper, leather, and fabric. Perfect for quick repairs.

The advantages
Universal instant adhesive
Does not drip or run
Gel consistency, especially suitable for porous and absorptive materials
Perfect for all quick repairs
Ideal for use on undersides and vertical surfaces
Bonds similar and dissimilar material combinations of wood, metal, ceramic, and most plastics

Cyanoacrylate adhesive Loctite 454

Cyanoacrylate adhesive Loctite 431

Cyanoacrylate adhesive Loctite 431

Art. no.: 419332

A single-component instant adhesive with high viscosity. For porous materials - ceramic, wood, paper.

Cyanoacrylate adhesive Loctite 431

Quick Loctite 406

Quick Loctite 406

Art. no.: 419368

Instant adhesive primarily intended for use on plastic and rubber. Temperature-resistant. Low viscosity.

Quick Loctite 406

THREAD LOCKING LOCTITE 2400

THREAD LOCKING LOCTITE 2400

Art. no.: 419351

Thread locking adhesive, medium strength.

THREAD LOCKING LOCTITE 2400

Thread Loctite 2701

Thread Loctite 2701

Art. no.: 215662

Green, methacrylate-based thread locking adhesive with high strength and low viscosity; fluoresces under UV light for monitoring.

LOCTITE 2701 is a green, low-viscosity, methacrylate-based thread locking adhesive with high strength, specially designed for chrome-plated surfaces. Fixing time on steel, 10 minutes; on brass, 4 minutes; and on stainless steel, 25 minutes. Ideal for application where the adhesive must be prevented from migrating. Tolerates light contamination from industrial oils Suitable for all metal hangers. Fluoresces under UV light.

The advantages:
High strength, especially on chrome-plated surfaces
Low viscosity
Fluoresces to allow quality control and inspection
Prevents undesirable movement, separation, leakage, and corrosion
Vibration-resistant
Seals threads - allows cutting through threads

Thread Loctite 2701

Thread Loctite 2701

Akryllim Loctite AA 326

Akryllim Loctite AA 326

Art. no.: 270264

LOCTITE AA 326 is a yellow-to-amber, no-mix structural and magnet adhesive with medium viscosity (thixotropic), activated with LOCTITE 7649. Good bonding on various types of ferrite materials, fixing time of 3 minutes, and shear strength of 15 N/mm². Can be used at temperatures up to +120°C. Requires LOCTITE 7649 for activation.

The advantages:
Suitable for magnet gluing
Medium viscosity (thixotropic)
Good bonding on various types of ferrite materials
Temperature resistant up to +120°C
Fixing time of 3 minutes
Shear strength of 15 N/mm²

Hand Sprayer Fiskars

Hand Sprayer Fiskars

Art. no.: 68128010

Transparent, yellow-to-amber liquid activator used to increase hardening time for LOCTITE anaerobic products at low temperatures.

LOCTITE SF 7471 is a transparent, yellow-to-amber liquid activator used when increased hardening time is required for LOCTITE anaerobic products. Particularly recommended for applications with passive metals or inert surfaces, and with large columns. LOCTITE 7471 is particularly recommended for low temperatures (<+15 °C).

advantages
Speeds hardening on passive and active surfaces
For large adhesive columns
Lifetime on parts: ≤7 days

Hand Sprayer Fiskars

Activator Loctite SF 7240

Activator Loctite SF 7240

Art. no.: 377023

Surface treatment - activator. Free of solvents Hardens at low temperatures.

LOCTITE SF 7240 is intended to speed hardening of LOCTITE anaerobic adhesives and sealants with no significant degradation of bonding strength. Particularly recommended for applications with passive metals or inert surfaces, and with large columns. Should also be used at low hardening temperatures. Particularly recommended for hardening conditions with temperatures under 15 °C.

The advantages:
Increases hardening speed on passive and inactive surfaces
For large adhesive columns
For low-temperature hardening (< 15℃)

Quick Loctite 407 20 GRAM

Quick Loctite 407 20 GRAM

Art. no.: 269497

Fast-acting glue for high temperatures. Low viscosity.

Fixing Loctite 6300

Fixing Loctite 6300

Art. no.: 419402

Strong cylindrical attachment. Non-marking. Great temperature resistance. High strength.

Activator Loctite 7452

Activator Loctite 7452

Art. no.: 35641570

Transparent, colourless to light amber-coloured activator for LOCTITE cyanoacrylate adhesives. Can be pre- or post-applied.

LOCTITE SF 7452 is a transparent, colourless to light amber-coloured activator to increase bonding speed for LOCTITE cyanoacrylate adhesives. Can be pre- or post-applied. Particularly well suited for post-application on cyanoacrylate adhesive to ensure fast bonding. Typical applications include bonding of wires and loops to circuit boards, access protection of adjustable components, mounting of standoffs, guides and stiffening.

The advantages:
Sets excess adhesive.
Provides excellent cosmetic results without the white discolouration caused by quick adhesives.
Not recommended for plastics susceptible to stress fractures.

Activator Loctite 7452

Primer Sika 215

Primer Sika 215

Art. no.: 224127

Sika Primer-215 is a transparent,
pale yellow liquid with low viscosity
that dries through reaction with
atmospheric moisture. It is used to
prime different plastics, woods and
other porous materials prior to
binding with Sika products. Sika
Primer -215 is manufacture in
accordance with ISO 9001/14001
quality assurance system and with
Responsible Care Program.

Sika Primer 3N

Art. no.: 197411

Used as a pretreatment on porous, absorbing materials and metals. Coverage per litre, porous surface 5 square metres and metals 8 square metres. 1-component. 1 litre.

Showing 52 of 75