Feedback
For closed system. With overheat protection, thermostat and switch. Made from internal corrosion-resistance sheet steel (see design below) Outer jacket of white sheet steel. With stainless steel immersion heater. Assembled fitting kit consisting of manifolds, shut-off valves, non-return valves, safety valves, vacuum valves, drainage valves and mixing valves. Delivery version: 2-phase 400V, switchable to 1-phase 230V-1 kW.
- Article number: 6933444
- Suppl. article no: 084010
- Ean no: 7331421333426
- Material class PFF121
Technical data
- Packagin Size: 1 ST/2 ST
- Tank volume: 82 l
- Material boiler tank: Copper
- Width: 600 mm
- Height: 820 mm
- Cold tap water connection: Tube end
- Hot fill: Yes
- Hot tap water connection: Tube end
- Connection voltage: 230-400 V
- Nominal diameter drain connection: 1/2 inch (15)
- Depth: 620 mm
- Duo model: No
- ηwh (water heating energy efficiency): 37.8 %
- Frequency: 50 Hz
- Capacity profile: L
- Degree of protection (IP): IP24
- Material casing: Steel
- With circulation connection: No
- With tap/mixer: Yes
- With off-peak electricity circuit: No
- With temperature indication: No
- With thermometer: No
- With pressure reducing valve: No
- With watercooler: No
- Nominal power: 2 kW
- Horizontal positioning: No
- Vertical positioning: Yes
- With cleaning opening: No
- Protective anode: No
- With temperature limit: Yes
- Three-phase model: No
- Heat-up time from 10 °C to 65 °C: 119 min
- Design form: Floor standing
- Outer pipe diameter drainage connection: 15 mm
- Outer pipe diameter cold tap water: 22 mm
- Outer pipe diameter hot tap water: 22 mm
- Plinth boiler: No
- Wall set-up: No
- Low-pressure model: No
- Energy efficiency class: C
- Suitable for boiling water: No
- Max. operating pressure: 10 bar