Motion detector IS 2360, Steinel

IS 2360 is an IR motion sensor for roof mounting with fully automatic function. It has a range of up to 3.5 meters for walking (not straight towards the sensor). The IS 2360 can be used in many different environments, both indoors and outdoors. It is not suitable for detecting people who have been sitting still in an office or classroom, see instead the Control Pro presence detector series. The after-light time, ie how long it should be lit after the last detected motion by the sensor can be set between 8 sec - 35 min.
Area of application: Outdoor, indoor, for motion detection of different environments e.g. entrance, passage, storage units, smaller garages etc.
Version: Motion detector with fully automatic function. Housing made of ABS plastic. Adjustment of functions with handle, concealed under the cover ring.
Assembly: Roof. Surface mounting. Mounting height 2.5 -2.8 m. Above floor level, a higher mounting height results in lower sensitivity for the sensor. Two or more motion detectors can be connected (master-master), parallel connection, all motion detectors will then get the master function.
Connection: From the side or from above, two connection holes Ø 15 mm. Connection terminal 4x1.5 mm².
Maximum load: Max 4 x HF devices, chokes, low energy lamps (176μF), but total load max. 400W fluorescent lamps. 2000W resistive load. Minimum load 10W.
Sensor: Max 3.5 meters for walking (not straight towards the sensor), 360 ° viewing angle.
Dusk level: 2 - 2000 lux (disconnection).
Persistence time: 8 sec - 35 min.
Ambient temperature: -20° C - +50° C