Order lines: 0

Ahlsell Products Ventilation Devices Supply air deviceAir supply devices - roof spreader with box

Air supply devices - roof spreader with box

Storlek, mm (aaa-bbb)
100-100, 125-125, 160-160,
200-200, 250-250, 315-315
(Anslutningsdimension låda - anslutningsdimension luftdon)
Utförande (c)
0 = oisolerad1 = isolerad2 = oisolerad med låg bygghöjd3 = isolerad med låg bygghöjd
Dessa anslutningslådor har lika stor inloppsdiameter som utloppsdiameter. Spjället kan lossas från anslutningen men kan inte tas ur anslutningslåda 1:1

Connection Box ALSd, Swegon

Connection Box ALSd, Swegon

Art. no.: 6621041

ALSc is an acoustic plenum box for supply and exhaust air terminals. The box is insulated with reinforced surface fibre secure insulation. The plenum box contains a fixed measurement point and a removable adjustment throttle.

Supply air diffuser CDDb, Swegon

Supply air diffuser CDDb, Swegon

Art. no.: 19049715

CDDb is a circular, perforated supply air terminal for placement on the ceiling. The device is white lacquered. The terminal can be supplemented by the ALSc plenum box.
The terminal can be used as an exhaust air terminal. Max air volume is specified as 30 dBa, 50 Pa with 360º diffusion.

Supply air diffuser DRTI for recessed assembly, Klimatbyrån

Supply air diffuser DRTI for recessed assembly, Klimatbyrån

Art. no.: 6520174

Air supply diffuser, with most types of nozzles for the premises where a flexible spreading pattern is desired.
DRTI is used for recessed mounting in standard load bearing supporting systems 12mm/600x600.
Max. recommended lower temperature 12°C. The frame is made of powder-coated steel, white colour RAL9003. ABS plastic nozzles.
Flow at 30 dBA with the connection box and open damper.
Fitted in the connection box type TK that can be ordered separately.

Connection box ALSd box contruction, Swegon

Connection box ALSd box contruction, Swegon

Art. no.: 6521043

Connection box made of galvanized steel plate.

Supply air terminal CKDa, Swegon

Supply air terminal CKDa, Swegon

Art. no.: 6621237

CKDa is a circular supply air terminal for placement on the wall or ceiling. Manages large air flows at low noise levels. Suitable for constant or variable air flows. Air supply can be provided in high or low temperatures, and in vertical or horizontal diffusion directions. Suitable for both domestic and industrial premises. Max air volume is specified as 30 dBa, 50 Pa and including plenum box. Used together with the ALSc plenum box which is ordered separately.

Supply air diffuser CDDb, Swegon

Supply air diffuser CDDb, Swegon

Art. no.: 6621003

CDDb is a circular, perforated supply air terminal for placement on the ceiling. The device is white lacquered. The terminal can be supplemented by the ALSc plenum box.
The terminal can be used as an exhaust air terminal. Max air volume is specified as 30 dBa, 50 Pa with 360º diffusion.

Supply air diffuser DRT, Klimatbyrån

Supply air diffuser DRT, Klimatbyrån

Art. no.: 6520170

Air supply diffuser, with most types of nozzles for the premises where a flexible spreading pattern is desired.
Max. recommended lower temperature 12°C. The frame is made of powder-coated steel, white colour RAL9003. ABS plastic nozzles.
Flow at 30 dBA with the connection box and open damper.
Fitted in the connection box type TK that can be ordered separately.

Supply air diffuser JET, Klimatbyrån

Supply air diffuser JET, Klimatbyrån

Art. no.: 6520370

For most types of premises where large volumes of air are to be supplied and adjustable pitch is required.
The conversion of long or short pitch is affected by the inner cone being turned completely. The JET can also be turned ±30 °.
Powder-coated steel plate, white colour RAL9003.

Supply air diffuser RA, Klimatbyrån

Supply air diffuser RA, Klimatbyrån

Art. no.: 6520376

Multi-diffuser for premises where large air flow is to be supplied.
The tool is mounted as standard in the cleanable connection box type TK containing measuring tubes and adjustment damper.
RA(I) is intended to be used for horizontal or vertical blowing in. RAI, size 160- 315 is used for recessed mounting in standard load bearing supporting system 12mm/600x600.
Max. recommended lower temperature 10°C and max. recommended upper temperature 15°C.
The frame is made of powder-coated steel, white colour RAL9003. Flow at 30 dBA with the connection box and open damper.
RA
Flow at 30 dBA with the connection box and open damper.

Supply air diffuser EAGLE Single, Swegon

Supply air diffuser EAGLE Single, Swegon

Art. no.: 6621250

Circular supply air diffuser, which consists of a spray part box and a removable spray part. The spray part box has a rubber ring sealed connection nipple. The spray part is equipped with aerodynamically-shaped nozzles which swivel. The air unit is made of steel plate and hot-dip galvanised steel plate. The entire unit is finished in our white standard paint, RAL 9010. Nozzles are manufactured in ABS plastic. Fitted in the connection box ALSc that can be ordered separately. Flow at 30 dBA, 50 Pa with the connection box.

Supply air diffuser COLIBRI Ceiling CC, Swegon

Supply air diffuser COLIBRI Ceiling CC, Swegon

Art. no.: 6621303

Square-supply air diffuser consisting of spray part box and spray. The spray plate is equipped with aerodynamically-shaped nozzles which swivel. The spray plate is hinged on one side and secured with springs on the opposite side. This attachment, Quick Access, means simpler and faster handling upon installation, adjustment and cleaning. The spray part box and spray part are made of steel plate. Connection duct is made of galvanised steel plate. The unit is painted inside and outside in our white standard paint, RAL 9010. Nozzles are manufactured in ABS plastic. Fitted in the connection box ALSc that can be ordered separately. Flow at 30 dBA, 50 Pa with the connection box.

Supply air diffuser COLIBRI Ceiling CR, Swegon

Supply air diffuser COLIBRI Ceiling CR, Swegon

Art. no.: 6621312

Square-supply air diffuser consisting of spray part box and spray. The spray plate is equipped with aerodynamically-shaped nozzles which swivel.
The spray plate is hinged on one side and secured with springs on the opposite side. This attachment, Quick Access, means simpler and faster handling upon installation, adjustment and cleaning. The spray part box and spray part are made of steel plate. Connection duct is made of galvanised steel plate.
The unit is painted inside and outside in our white standard paint, RAL 9010. Nozzles are manufactured in ABS plastic. Fitted in the connection box ALSc that can be ordered separately..
Flow at 30 dBA, 50 Pa with the connection box

Supply air Diffuser Pelican Ceiling CS, Swegon

Supply air Diffuser Pelican Ceiling CS, Swegon

Art. no.: 6621325

A square perforated air diffuser for installation in ceiling. The device is suitable for installation in coffered under-ceiling, but is also suitable for a fixed under-ceiling. It can handle large lower temperatures as well as constant or variable flows. The tool is fitted with a variable air deflector for a flexible spread pattern. The spray part box and spray front are made of steel plate, the connection duct of galvanized steel plate. The entire unit is finished in our white standard paint, RAL 9010. Fitted in the connection box ALSc that can be ordered separately.

Supply air diffuser KHDA, FläktGroup

Supply air diffuser KHDA, FläktGroup

Art. no.: 66621110

KHDA is a quiet supply air device for large and high premises, for example, industrial premises, sports halls and warehouses. The supply air unit has a long reach so that the air is able to reach down to the residential zone or cover large surfaces. Fitted in the duct for horizontal or vertical air direction.

Supply air diffuser DCR, Klimatbyrån

Supply air diffuser DCR, Klimatbyrån

Art. no.: 6520501

Air supply diffuser, with most types of nozzles for the premises where a flexible spreading pattern is desired. The tool is mounted as standard in the cleanable connection box type TK containing measuring tubes and adjustment damper.
DCR is supplied with tangential spread if nothing is specified in the order. Max. recommended lower temperature is 12 ºC. DCR can also be used without the connection box. Adjustment may then be done with a separate dampers.
The frame is made of powder-coated steel, white colour RAL9003. ABS plastic nozzles.

Supply/Exhaust air device PETI, Klimatbyrån

Supply/Exhaust air device PETI, Klimatbyrån

Art. no.: 6520304

Perforated exhaust air devices for most types of premises where large air flows have to be evacuated.
PETI is used for recessed mounting standard load bearing supporting systems 12mm/600x600.
Air deflector made of galvanised sheet metal.
Flow at 30 dBA with the connection box and open damper.
Fitted in the connection box type TK that can be ordered separately.

Supply air diffuser EAGLE Ceiling CR low-building, Swegon

Supply air diffuser EAGLE Ceiling CR low-building, Swegon

Art. no.: 6621190

Square roofing device with supply air nozzles. Suitable for VAV and DCV applications.

Supply air terminal FALCON Ceiling, Swegon

Supply air terminal FALCON Ceiling, Swegon

Art. no.: 6621231

Circular supply air terminal for placement on the roof. Manages large air flows at low noise levels. Suitable for constant or variable air flows. Air supply can be provided in high or low temperatures, and in vertical or horizontal diffusion directions. Suitable for both domestic and industrial premises. Max air volume is specified as 30 dBa, 50 Pa including plenum box. Used together with the ALSc plenum box which is ordered separately.

Supply air diffuser EAGLE Ceiling CR, Swegon

Supply air diffuser EAGLE Ceiling CR, Swegon

Art. no.: 6621140

LOCKZONE Ceiling is a square supply air terminal with rotating nozzles.
The terminal is designed for mounting in modular suspended ceilings but can also be mounted effectively in fixed sub-ceilings. The disc technology provides air supply even in very low temperatures. The terminal is suitable for both constant and variable air flows. The diffuser part is equipped with Quick Access, which means that the terminal can be quickly opened and closed when mounting, adjusting and cleaning.
Max air volume is specified as 30 dBa, 50 Pa and including plenum box. Mounts onto ALSc plenum box which is ordered separately.

Supply air diffuser ARIES-1, FläktGroup

Supply air diffuser ARIES-1, FläktGroup

Art. no.: 66620001

Connection box ATTD, FläktGroup

Connection box ATTD, FläktGroup

Art. no.: 66621432

Distance frame DSI PETI/DRTI, Klimatbyrån

Distance frame DSI PETI/DRTI, Klimatbyrån

Art. no.: 6520338

Distance frame for Swegon Ceiling

Distance frame for Swegon Ceiling

Art. no.: 19055733

ÖÖ - Tilluftsdon EAGLE Ceiling CC, Swegon

ÖÖ - Tilluftsdon EAGLE Ceiling CC, Swegon

Art. no.: 19057821

LOCKZONE Ceiling is a square supply air terminal with rotating nozzles.
The terminal is designed for mounting in modular suspended ceilings but can also be mounted effectively in fixed sub-ceilings. The disc technology provides air supply even in very low temperatures. The terminal is suitable for both constant and variable air flows. The diffuser part is equipped with Quick Access, which means that the terminal can be quickly opened and closed when mounting, adjusting and cleaning.
Max air volume is specified as 30 dBa, 50 Pa and including plenum box. Mounts onto ALSc plenum box which is ordered separately.

TK Connection box, Klimatbyrån

TK Connection box, Klimatbyrån

Art. no.: 19058428

Connection box for supply air in ceiling.
Contains measuring tubes and adjustment damper.
Made of hot-galvanised steel plate, internally washable and fibre-free insulation of type Therwoolin.

Showing 25 of 25