Order lines: 0

Ahlsell Products Tools & Machines Welding and GasGasutrustning

Gasutrustning

Tillbehör gasutrustning

Ahlsell's range of tools and machines includes power tools, hand tools, plumbing tools, hand, torch and flashlights, measuring and marking tools, cutters, grinding and brushes, brushes, rollers, wallpaper, and painting tools, cutting tools, welding and gas, compressed air, hydraulics, pneumatics, rubber cloths and vibration damping, cleaning tools, property and office, tools and garden products. We value reliable products that last a long time. That is why you will find tools and machines of high quality in our range. Explore all our tools and machines online or in one of our stores.

Regulator aga unicontrol 500

Regulator aga unicontrol 500

Art. no.: 250139

With a hexagonal nut. Available for most industrial gases, can handle all gas welding, heating, and brazing tasks, as well as flame cutting in up to 300 mm material thickness. The regulator is mounted and disassembled quickly and easily. Easy-to-read manometers. One-way regulation of working pressure. Supplied with hose connectors for 5.0 and 6.3 mm hose diameters, union nut, and three additional gaskets. Complies with current standard EN 2503.

Regulator aga unicontrol 500

Regulator aga unicontrol 500

Regulator AGA FIXICONTROL Hand Tight Oxygen

Regulator AGA FIXICONTROL Hand Tight Oxygen

Art. no.: 228015

Regulator AGA FIXICONTROL Hand Tight Argon

Regulator AGA FIXICONTROL Hand Tight Argon

Art. no.: 229970

Accessory aga x11

Accessory aga x11

Art. no.: 270406

Handle with check valve BV 12, for 5.0 mm hose diameter and coupling.

Accessory aga x11

Regulator aga unicontrol 500 hand tight

Regulator aga unicontrol 500 hand tight

Art. no.: 250137

With manual connection. Available for most industrial gases. Handles all gas welding, heating, and brazing, as well as flame cutting up to a thickness of 300 mm. For flame cutting in material thicknesses over 300 mm, choose R 21 for oxygen. The regulator is mounted and disassembled quickly and easily. Provides excellent stability at the welding torch at low working pressures and small flow, facilitates pipe welding work. High flame stability at large gas outlets and when using long hoses, saves time for welders working far from the gas cylinders. Easy-to-read manometers. One-way regulation of working pressure. Supplied with hose connectors for 5.0 and 6.3 mm hose diameters, union nut, and three additional O-rings or gaskets. Complies with current standard EN 2503.

Ironside Soldering Iron Tip

Ironside Soldering Iron Tip

Art. no.: 717801

Gasket aga

Art. no.: 108307

For safety reasons, always use aluminium packing for oxygen. Note that aluminium packings become hard when deformed. A deformed, hard packing increases the risk of leakage. Replace packing regularly.

Cutting nozzle aga p331 propan

Cutting nozzle aga p331 propan

Art. no.: 214098

Fits handheld torches X21, X511 and corresponding older models. 3-cone sealing cutting nozzle with slit flame. Two-piece. The inner nozzle has a cylindrical cutting duct and is shorter than the outer nozzle, with retraction that helps to effectively control the propane flame, providing a smooth, turbulence- free flame. Large cutting area - a series of seven cutting nozzles for material thicknesses of 1-300 mm. Long lifespan, thanks to the cooling flow to the oxygen cutting duct.

Regulator aga unicontrol 300 hand tight

Regulator aga unicontrol 300 hand tight

Art. no.: 250135

With manual connection. Available for argon and argon mixtures, as well as for carbon dioxide. The regulator has a content manometer and a work pressure manometer that shows the gas flow in litres per minute, along with one-way gas flow control. Intended for TIG and MIG/MAG welding. Supplied with hose connectors for 5.0 and 6.3 mm hose diameters, union nut, and three additional O-rings. Complies with current standard EN 2503.

Regulator aga fixicontrol hand tight

Regulator aga fixicontrol hand tight

Art. no.: 228014

With manual connection. Intended for small to medium sized gas outlets. Provides all gas welding, brazing, heating with nozzle max 2500 l/h, and flame cutting up to 50 mm material thickness. Easy to read manometers fitted with rubber protectors. One-way regulation for working pressure. Supplied with hose connection for gas hoses 5.0 mm in diameter, union nut, and three additional o-rings. Manufactured in accordance with EN 2503.
Argon- flow meter grading 0-32 l/min.
Article 229 660 - including fastener for connection to the small bottle.

Soft Flame Burner Ironside

Soft Flame Burner Ironside

Art. no.: 717802

Flowmeter aga rotam plus

Flowmeter aga rotam plus

Art. no.: 175276

Flow meter, used with flask regulators for argon and argon mixtures, as well as for carbon dioxide, with 3/8" connection on the outlet side. Used in conjunction with regulators with a working pressure manometer graded in bars (eg UNICONTROL 500 argon), the regulator's working pressure should be set to 2.5 bar to provide the correct gas flow. Connects to a T-piece. The T-piece is adjustable to get the right angle in relation to the regulator outlet. T-piece ordered separately. Displays the gas flow in l/min, with a scale rating adjusted for argon and carbon dioxide respectively. The flow is read at the top of the ball / floating body. Supplied with hose connectors for 5.0 mm hoses. Double ROTAM PLUS is used when you want protective gas for both the welding gun and root protection.

Blue light Sievert Powerjet 2535 without gas tank

Blue light Sievert Powerjet 2535 without gas tank

Art. no.: 383895

Powerjet 2535 is the most powerful and effective combustion system on the market. Modern combustion technology in combination with a unique gas mixer provides a low temperature of 2400°C. New ergonomic handle with stainless, high-efficiency cyclone burner for even heat distribution around the workpiece. All types of soldering and hot work are carried out with the highest quality and efficiency. Supplied without gas canister.

Accessory aga

Art. no.: 264331

Aluminium - DIN AlMgSi1. MISON 18 adapted for MIG/MAG welding. Volume 5 litres = 1 m3. Sufficient for 60-200 minutes. Flat foot.

Gas container Sievert Lighter gas butane

Gas container Sievert Lighter gas butane

Art. no.: 314698

Butane gas for cigarette lighters and blow torches. Hazard labelling: Extremely flammable.

Check valve AGA SAFE-GUARD 5

Check valve AGA SAFE-GUARD 5

Art. no.: 375116

Intended for installation on gas bottle regulators or tapping station in the gas supply system. Manufactured according to EN 730. Type approval. Prevents counterflow, stops and cuts off ongoing backflow, shuts off the gas supply for ongoing backflow and in the event of overheating (95°C). The backflow guard has a recessed reset arm when it is open and functioning. In the event of backflow, the lever is lowered and the gas flow is stopped. Reset is accomplished by raising the lever again and opening the gas flow.

Flowmeter aga

Art. no.: 178117

Gas test flow gauge for gas arc welding, for argon and argon mixtures with carbon dioxide. The flow meter tube is held vertically, tightly against the gas cap on the welding gun. The gas flow is read at the centre of the ball according to a graded scale of 5-25 l/min. Gas flow for gas arc welding always refers to the flow in the gas nozzle. Depending on the quality and condition of the hose and the welding gun, the flow in the gas nozzle can be significantly less than the value displayed on the flask regulator.

Accessory aga x11

Accessory aga x11

Art. no.: 108359

Welding inserts for AGA X11 cutting and welding systems.

Accessory aga x11

Accessory aga x11

Art. no.: 108341

Accessories for gas welding and flame cutting.

Accessory aga x11

Accessory aga x11

Art. no.: 108342

Accessory aga x11

Accessory aga x11

Art. no.: 270386

Cutting inserts AGA, in a variety of designs. For oxygen/acetylene gas.

Accessory aga x11

Accessory aga x11

Accessory aga x11

Art. no.: 129558

Contains 12 needles, 0,5-2,4 mm.

Accessory aga x21

Accessory aga x21

Art. no.: 214112

Handle AGA X21, round or oval, with accessories.

Accessory aga x21

Accessory aga x21

Art. no.: 178061

Accessories for pressure torches X21.

Accessory aga

Art. no.: 175206

For increased safety. Marked with gas type, flow direction, maximum working pressure, and manufacturer. Comes in a package with one each of acetylene/propane/oxygen. Check valve does not replace the flashback arrestor.

Quick connecters aga

Quick connecters aga

Art. no.: 108367

Fits all AGA regulators, including older models. With quick couplings, hoses and torches can be changed out quickly and easily without tools. Quick couplings for acetylene and hydrogen have red markings, those for oxygen and other non-combustible gases have blue markings. Quick couplings for the regulator/outlet and gas hoses make it quick and easy to connect/disconnect from the gas line. Thanks to the auto lock mechanism, the equipment can be dismantled while under pressure. Meets requirements in accordance with DIN 8544 and ISO/DVS 7289.

Cutting nozzle aga ha 411

Cutting nozzle aga ha 411

Art. no.: 214107

Compatible with X11. Flat sealing 1-piece nozzle with stick flame. The nozzle is 100% forged copper. Cylindrical gas ducts, which provide a smooth, turbulence-free heating flame, and a cutting oxygen jet. Nozzle HA 411-5, for cutting in material thicknesses of 50-100 mm, can only be used in later versions of X11 made after 1987.

Cutting nozzle aga a311 acetylen

Cutting nozzle aga a311 acetylen

Art. no.: 108361

Suitable for X11 pressure torch, X21 and corresponding older models. 3-cone sealing cutting nozzle. Cylindrical cutting duct and six heating flames, except the largest nozzle A 311-8 - 300-500 mm, which has nine heating flames. Forged from a single piece of copper over a polished steel mandrel, which provides a smooth, turbulence-free flame. Nozzle A 311-1 is a “thin-plate nozzle," where heat dissipation becomes minimal resulting in low deformation of the workpiece. Large cutting area - a series of eight cutting nozzles for material thicknesses of 1-500 mm. Long lifespan, thanks to the cooling flow to the oxygen cutting duct.

Spray aga tl 4

Art. no.: 132137

For sealing control of all systems with gas or air under pressure. Spray directly on the location you want to check. If there is a leak, small, clear bubbles will form. TL 4 is completely non-toxic. Does not contain hazardous substances.

Weling cloth up to 1100 c

Weling cloth up to 1100 c

Art. no.: 19087945

Zetex plus is a highly-textured silicate-based fabric, treated with an inorganic binder (vermiculite) that allows it to withstand sustained working temperatures up to 1100 ° C. Asbestos-free, with an insulation capacity 49% higher than asbestos. The welding blankets are lined and fitted with 2 and 4 eyelets respectively.

Handle sievert promatic

Handle sievert promatic

Art. no.: 177770

Burner handle with ergonomic design, with automatic ignition and extinguish function. Bayonet mount for simple and quick burner exchange. Rotating connection to avoid chord tangles. Equipped with suspension hook and foot rest. Brass wheel for fine-adjustment of flame. Wide selection of burners for all applications. Connection thread R3/8"V. Suits hose nipple 177818. ProMatic burner handle always requires a regulator.

Burner sievert promatic

Burner sievert promatic

Art. no.: 264695

Standard narrow flame and cyclone burner Sievert Promatic for hot work, primarily hard and soft soldering.

Burner sievert promatic

Burner sievert promatic

Art. no.: 264696

Power burner Sievert Promatic for hot work, primarily insulation, construction and road work.

Burner sievert promatic

Burner sievert promatic

Art. no.: 230007

For hot work, primarily shrinking work

Heat Tool Set Sievert Promatic

Heat Tool Set Sievert Promatic

Art. no.: 279432

Complete kit for heat and shrink work. The kit contains burner handle 3366, soft flame burner 3341, hot-air burner 3334, 4 m gas hose 7173, regulator 3091 and tool kit 7201.

Burner sievert promatic

Burner sievert promatic

Art. no.: 245040

Complete burner kit for all types of hot work e.g. hard and soft soldering. Consists of burner handle 3366, cyclone burner 3335, 4 meter hose and regulator 309121 with fixed pressure of 2 bar. For connecting to P-canister.

Burner sievert promatic

Burner sievert promatic

Art. no.: 245043

Made of metal-reinforced plywood. With handle and lock mechanism. Space for up to 8 burners. 4 metre hose, regulator and gas canister 2000.

Power burner sievert 86

Power burner sievert 86

Art. no.: 242452

Complete burner set with burner handle 3486, neck tube 3511, standard burner 2941, 2 metre hose and with or without valve 700001 for connecting to gas canister 2000 or 2012.

Power burner sievert pro 88

Power burner sievert pro 88

Art. no.: 295052

For heat work, primarily insulation, construction and road work. Also suitable as weed burner. Complete burner set with burner handle 3488, neck tube 3506 (750mm), power burner 2960, 5 m gas hose 8 mm 770025 and hose failure valve 3054.

Power burner sievert pro86/88

Power burner sievert pro86/88

Art. no.: 264699

Neck tube is connected between the burner handle and the burner.

Power burner sievert pro86/88

Power burner sievert pro86/88

Art. no.: 105336

For all types of hot work, primarily insulation, construction and road work

Power burner sievert pro 88

Power burner sievert pro 88

Art. no.: 245028

For hot work, primarily insulation, construction and road work. Turboroofer 60. Power burner kit of highest Sievert grade. Complete set with burner handle Pro 88, 500mm neck tube, 60mm (2960) power burner and neck tube support. Connection: R3/8"V. Drying, preheating, thawing.

Blowtorch sievert pro 6250

Blowtorch sievert pro 6250

Art. no.: 243120

For heat work, primarily insulation, construction and road work.
Hand torch 6250. Robust and well-known hand-blower torch with handle, 400 mm neck tube, 56 mm power burner. PLEASE NOTE! Hose nipple not included.

Blowtorch sievert microjet

Blowtorch sievert microjet

Art. no.: 272011

With piezo ignition. Powered with butane gas from regular cigarette lighters. The lighter is inserted in the handle. Refilled by changing the lighter or by refilling the existing one. Child safe ignition button. The burner provides a precise and wind-proof narrow flame. Suitable for melting/thawing of snow and ice, lighting fires, candles and marshalls, shrinking, smaller soldering, spot heating, hunting & fishing etc. Supplied with cigarette lighter without gas. The lighter is filled with butane gas canister 314698. Burning time 20 minutes/fill.

Blowtorch sievert turbo-lite

Blowtorch sievert turbo-lite

Art. no.: 267381

Composite plastic outer cover. With piezo ignition. Powered with butane gas and can be refilled with butane gas canister 314698, hazard labelling: extremely flammable. Child-safe protective lock. Lockable button for longer intervals. The burner provides a precise and wind-proof narrow flame, suitable for spot heating, e.g. thawing bike and car locks, lesser hot works, camping or as cigarette lighter. With keyring. Delivered with only a small amount of gas. Burning time 30 minutes/fill.

Blowtorch sievert pro-torch

Blowtorch sievert pro-torch

Art. no.: 272014

With piezo ignition. Powered with butane gas and can be refilled with butane gas canister 314698, hazard labelling: extremely flammable. The precise flame can be adjusted both in shape and intensity. Made of stabile composite plastic. Suitable for cooking (e.g. colouring, flaming), soldering, shrinking work, melting/thawing of snow and ice, lighting fires, candles and marshalls etc. Supplied without gas. Flame temperature 1300ºC. Burning time 60 minutes/fill.

Blowtorch sievert pro-torch

Blowtorch sievert pro-torch

Art. no.: 272013

With piezo ignition. Powered with butane gas and can be refilled. Hazard labelling: Extremely flammable. The powerful flame can be adjusted both in shape and intensity. Made of stabile composite plastic. Flame temperature 1350ºC. Burning time 200 minutes/fill. Supplied without glass. Application area: cooking (e.g. colouring, flaming), soldering, shrinking work, melting/thawing of snow and ice, lighting fires, candles and marshalls etc.

Blowtorch sievert pro-torch

Blowtorch sievert pro-torch

Art. no.: 272012

With piezo ignition. Powered with butane gas and can be refilled with butane gas canister 314698, hazard labelling: extremely flammable. The stabile flame can be adjusted both in shape and intensity. Detachable support foot. Rubber-coated handle for optimum comfort. Brass gas tank. Suitable for cooking (e.g. colouring, flaming), soldering, shrinking work, melting/thawing of snow and ice, lighting fires, candles and marshalls etc. Supplied without gas. Flame temperature 1300ºC. Burning time 220 minutes/fill.

Blowtorch sievert powerjet

Blowtorch sievert powerjet

Art. no.: 230011

Blow torch for both professional and hobby users. For soft soldering, hot works, lighting fires etc. Complete set with burner head (1bar), standard burner 8704, Power gas container 2204 and foot support.

Blowtorch sievert metaljet

Blowtorch sievert metaljet

Art. no.: 272624

Blowtorch Sievert MetalJet for UltraMapp gas. MetalJet 2155, together with UltraMapp gas 2206, provides the absolute hottest hand-held heating tool on the market. Robust metal burner handle. High-effect stainless steel cyclone burner. Modern burning technology together with unique gas mix provides 2400ºC. Fits together with PowerJet burner. Can also be used together with gas container 2208 (propane). Temperature 1925 °C. Gas tank 2206 and 2208 withstand down to -40°.

Burner sievert powerjet

Burner sievert powerjet

Art. no.: 230013

Suits the solders 2135, 2155, 2193, 2235 (burner 230015 and 264404 are not suitable for this blowtorch) and 2335. For hot work.

Burner sievert powerjet

Gas hose sievert

Gas hose sievert

Art. no.: 245045

High pressure hose approved in accordance with EN559 standard. Extra cold-resistant and can be used in temperatures down to -30°C. Constructed with an inner layer of black, gas-resistant rubber, an inter-layer of woven reinforcement to withstand high pressure and an outer orange-coloured layer that protects against external impacts such as sunlight, ozone and wear.

Showing 52 of 84