Order lines: 0

Ahlsell Products Tools & Machines Power tools and machinesPower tools, mains-operated

Power tools, mains-operated

Do you need power tools for work? Ahlsell helps you find the right power tools for your job. We have electric hand tools for various tasks, whether it is assembly, renovation, or construction. In our range of powerful and durable power tools, you will find everything from screwdrivers, grinders, and circular saws to water pumps and pressure washers as well as accessories such as batteries and battery chargers. Benefit from the power of the tool as you work. Power tools make your work easier and make your work efficient. Explore our wide range of power tools online or visit your nearest Ahlsell store.

Impact Drill DewaltDCD100P2T-QW,18V, 2X5AH,TSTAK

Impact Drill DewaltDCD100P2T-QW,18V, 2X5AH,TSTAK

Art. no.: 72300902

Multi-sheet Heavy Duty 9 parts

Multi-sheet Heavy Duty 9 parts

Art. no.: 469223

Q235+Diamond
- 77.5mm triangle diamond blade
(200687)
- #65mm circle diamond
(200337)
65Mn
- 52mm scraper (200336)
- 51.5 flat scraper (200955)
SKS51
- 10mm cutting blade for wood
(200956)
- 33 mm curved cutting blade for
wood and plastic (200958)
- 34mm cutting blade for wood
(200329)
- 34mm cutting blade for wood
with big teeth (200331)
- #87x0.6mm circle blade for
wood (200689)

Angle Grinder Metabo WEQ 1400-125

Angle Grinder Metabo WEQ 1400-125

Art. no.: 742520

Robust, universal and economical: ergonomic angle grinder for all uses. Powerful engine with good overload resistance. Tacho-Constamatic (TC) full-wave electronics: effective work thanks to constant speed during loading. Toolless, quick disk changeover with one push of a button with the Metabo M-Quick system. Mechanical safety coupling Metabo S-automatic: minimises recoil efficiency to the lowest level on the market if the disc were to block – protects the user optimally and allows them to resume work quickly. Electronic overload protection for long service life. Electronic soft starter and protection against restart. The gear housing can be mounted in 90° steps for use with left hand or for cutting.

Saw blade Dewalt DT207

Saw blade Dewalt DT207

Art. no.: 384469

Saw blade for Dewalt.
DT20701, for wood and for wood with nails.
DT20702, for wood and metal. Titanium
DT20707, for metal. Titanium
DT20708, Round segment saw blade.

Saw blade Dewalt DT207

Saw blade Dewalt DT207

Saw blade Dewalt DT207

Saw blade Dewalt DT207

Saw blade Dewalt DT207

Drill bosch

Art. no.: 308922

Compact design and low weight makes for easy handling in serial drilling. Practical belt clips. Stored chuck yields high accuracy. Control electronics for precise drilling site location. Right / left running.

Drill Bosch GBM 10 RE

Drill Bosch GBM 10 RE

Art. no.: 308930

Powerful600Wmotor, perfect for metal drilling up to 10mm. Stored chuck yields high accuracy. Compact design and low weight allows for optimal handling in rather demanding drilling.

Drill Makita DP4011

Drill Makita DP4011

Art. no.: 416045

Drilling machine with durable metal unit which provides long life. Safety switch protects the user. The ergonomic and rubber-covered handle ensures safe and comfortable work position. Input 725 W.

Grinder Ironside OSC

Grinder Ironside OSC

Art. no.: 499451

Grinder with brushless motor. Patented cooling system. Sealed circuit board. Low profile. Comfortable handle & trigger. Ergonomic support for the wrist. User-friendly speed control. Spider thread: 5/16. Orbit: 5 mm. Clips for attaching the power cord to the suction hose are included. Sound / Decibel: 71 dB(A).

Heat Gun Steinel HG 2120E

Heat Gun Steinel HG 2120E

Art. no.: 1638250

HG 2120 E has electronic temperature control with a range of 80-630° C; temperature is set via a dial on the back of the pistol, and the airflow is controlled via a 3-step switch on the handle. HG 2120 E is also equipped with an ergonomic soft-grip handle and overheating protection. The motor air intake is protected by an air filter, which can easily be cleaned, to prevent objects from reaching the motor and the heating element. The upper side of the pistol is equipped with a loop for hanging. HG 2120 E can be used for paint removal, drying, soldering of copper pipes, hardening, dissolving of adhesive joints, etc., but can also be used in welding floor seams, foil welding, shrink insulation, mirror welding, etc. 1638251 is supplied in a bag. Includes 3 nozzles and 100 shrink tubes for diameters of 1.6-12.0 mm.

Saw Blade DEWALT DT20723

Saw Blade DEWALT DT20723

Art. no.: 538791

Reciprocating Saw Makita JR3070CT

Reciprocating Saw Makita JR3070CT

Art. no.: 354124

Strong Sabre saw with 1510W power and an impact length of 32mm. The saw is equipped with a pendulum motion which can be set at three levels and AVT (Anti-Vibration Technology) for dampened vibrations. Tool free blade change and base adjustment simplifies the job.

Imuletku PELA

Art. no.: 36117172

Heat Gun HiKOKI RH600T

Heat Gun HiKOKI RH600T

Art. no.: 506728

User-friendly and functional heat gun with powerful heating element and high working temperature. Ergonomic rubberized grip. Easily accessible two-stage rocker switch (2 airflow speeds). Two temperature settings. Cold function for rapid cooling. Protection against overheating. With suspension bracket. Accessory set in 5 parts included.

Belt Sander Makita 9031

Belt Sander Makita 9031

Art. no.: 210859

Easy to operate abrasive belt grinder suitable for finishing, grading or working in confined spaces. Belt speed is regulated when processing different materials.

Reciprocating Saw Flex RS11-28

Reciprocating Saw Flex RS11-28

Art. no.: 466902

A powerful tiger saw of 1100W with integrated LED light. The blade can be turned 180 degre for best accessibility in narrow spaces. Standard equipment: 1 x selection of saw blades, 1 x carrying case.

Magnetic Drill Fein KBU 35 MQW

Magnetic Drill Fein KBU 35 MQW

Art. no.: 472988

Small 1-speed, all-round magnetic core drill machine with large stroke length with right / left run MK2- tool bracket and many features for effective work at the construction site. Tool bracket 3/4" Weldon and MK2. The kit includes: 1 bag, 1 coolant container, 1 strap lashing, 1 chip crate, 1 centre stick, 1 child protection and 1 expel wedge.

Jigsaw Makita 4351 FCTJ

Jigsaw Makita 4351 FCTJ

Art. no.: 384501

Ergonomic grip and low vibration level. No tools necessary for blade replacement. Torque adjustment when processing different materials. Pendulum motion adjustable in three positions. LED lighting to provide good visibility on the workpiece. Effective vibration attenuation. The ergonomic and rubber-covered handle ensures safe and comfortable work position. Standard equipment: Comes with saw blade, bottom plate, anti-splinter cover, MAKPAC and dust sleeve coupling.

Heat Gun Steinel HG 2620E

Heat Gun Steinel HG 2620E

Art. no.: 419788

HG 2620 E is equipped with a brush-less motor with a service life of 10,000 hours; the heating element can easily be replaced and calibrated with plug & play technology. Temperature and airflow have step-less adjustment via an easy-to-use joystick; the selected value is shown in a display on the top of the tool. It is also possible to store up to four different programs for different types of operation. HG 2620 is equipped with an ergonomic soft-grip handle and double overheating protection. The air intake has a fine dust filter that protects the motor and electronics. HG 2620 is intended for use with all of Steinel’s professional nozzles that screw into place. In addition, the HL Scan Pro temperature scanner can be mounted on the HG 2620 E.

Varmluftspistol Metabo HGS 22-630 m metaBOX 145

Varmluftspistol Metabo HGS 22-630 m metaBOX 145

Art. no.: 758716

Circular Saw Dewalt DWE550

Circular Saw Dewalt DWE550

Art. no.: 354634

Compact saw that is lightweight, user-friendly and with 55 mm saw depth. Open blade guard for better visibility of the saw line. Blowing functions clear the line of sight from sawdust. Dust extraction coupling provides less dust and improved work environment when industrial vacuum cleaner is connected. Comes with 18-jawed saw blade and blade guard.

Circular Saw Dewalt DWE560

Circular Saw Dewalt DWE560

Art. no.: 354635

Compact saw that is lightweight, user-friendly and with 65 mm saw depth. Open blade guard for better visibility of the saw line. Blowing functions clear the line of sight from sawdust. Dust extraction coupling provides less dust and improved work environment when industrial vacuum cleaner is connected. Directly compatible with DEWALT Airlock dust extraction system for easy, safe connection to the vacuum hose. Comes with 18-jawed saw blade, blade guard and saw-blade wrench.

Drill Grinder Proxxon IBS / E

Drill Grinder Proxxon IBS / E

Art. no.: 400692

A high-speed machine with balanced special motor. Continuous speed control (full wave electronics). Ball-bearing precision shaft of ground steel. With six 3-piece steel clamping sleeves (1.0 - 1.5 - 2.0 - 2.4 - 3.0 - 3.2 mm incl. clamping nut). Stable front made of aluminium castings. Casing of fibreglass reinforced polyamide. With 20 mm MICROMOT-system adaption for use in pillar drill stands and holders. Supplied in case together with 34 tools.

Angle Grinder Proxxon LWH

Angle Grinder Proxxon LWH

Art. no.: 400693

For the processing of steel, NE-metals (non-ferrous metals), glass, ceramic, plastic and wood. For cutting, deburring, grinding, polishing, finishing, polishing, fine polishing and rough shaping of wood. High-quality, well-balanced, low-noise DC special motor with long life. With stable front of aluminum castings and casing of fibreglass reinforced polyamide. Complete with grinding wheels of special fused alumina (60 K), lamellar grinding wheel (100 K) and cutting-blade (reinforced). Kept in spacious, sturdy bag. Long-Necked-Angle Grinder LWS. Overrun time less than 1 second. Insulation class: II.

Belt Sander Proxxon BS/E

Belt Sander Proxxon BS/E

Art. no.: 400694

Grinding of small openings, grinding of moulds, stains, radii, remove burrs and bevel of small parts. Driving head of alloy casting, gives high stability. Careful roller bearing fit Casing of fibreglass reinforced polyamide. High-quality, well-balanced, low-noise DC special motor with long life. Stepless speed control (full wave electronics). Grinding head adjustable for height 60 degrees at the touch of a button. Extraction studs for connection of vacuum cleaner. Including 4 sanding belts (two each of 80 and 180 grain respectively. Insulation class: II. Kept in spacious, sturdy bag.

Multicutter Bosch GOP 40-30

Multicutter Bosch GOP 40-30

Art. no.: 469191

Versatile and quick changing of accessories. With LED for perfect view. Snap In function for accessory change without tools in 3 seconds. 3D interface for power transmission from apparatus to accessory. Abrasive frequency unloaded 8,000 – 20,000 tubes/min.

Sander PELA ROS090

Sander PELA ROS090

Art. no.: 36115965

Mixer Flex MXE 1000

Mixer Flex MXE 1000

Art. no.: 751706

1-speed mixer with stepless switch. 1010 W. Robust and generously dimensioned gear housing for high torque and long service life. Full wave electronics with soft start. Temperature monitoring, overload protection and stepless rocker switch for controlled speed until maximum speed is reached. High traction in all rev ranges. On / off button with lock and protection in case of power failure. Ideal for stationary operation in a mixing station. The flexible rubber cover over the switch prevents dirt from entering. No disturbances due to the switch being stuck. Ergonomically designed handle that is comfortable to hold. Four corner rubber protectors provide safe storage and transport. The protective cover over the engine housing directs the cooling air flow and prevents, for example, the penetration of splashes. For different areas of use up to 40 kg. The standard mixer is perfect for those who mainly mix in the low speed range. Mixture: Suitable for tile fix, grout, filler, glue, plaster, mortar. Standard equipment: 1 mixer beater WR2 120x600 M14.

Satin finishing machine PELA

Satin finishing machine PELA

Art. no.: 36116075

Multi Tool DEWALT DWE315

Multi Tool DEWALT DWE315

Art. no.: 384467

Quick change and adjustment of accessories, no Allen key needed. Good ergonomics. Variable speed 0-22,000 rpm. Oscillating angle 1.6°. Powerful 300 W motor. Standard equipment: Oscillating saw blade for wood with nails. Oscillating scraper. Oscillating sanding plate. Sandpaper (25 mixed grain sizes). Universal adapter and 5 mm Allen key.

Mixer Ironside MX1600

Mixer Ironside MX1600

Art. no.: 716053

Robust and generously dimensioned gear housing for high torque and long service life. Soft start. Temperature monitoring, overload protection and stepless rocker switch for controlled speed until maximum speed is reached. High traction in all rev ranges. Comfortable 2-stage shifter that can be reached from the grip position without interrupting work, which is splash-protected by a rubber sleeve On / off button with lock and protection in case of power failure. Ideal for stationary operation in a mixing station. The flexible rubber cover over the switch prevents dirt from entering. No disturbances due to the switch being stuck. Ergonomically designed handle that is comfortable to hold. Four corner rubber protectors provide safe storage and transport.. Spindle lock with restart protection. Simplifies the replacement of the mixer beater. For different areas of use up to 80 L / 120L.. Mixture: Suitable for tile fix, grout, filler, glue, plaster, mortar. Standard equipment: 1 mixer beater WR2 140x600 M14 and spanner SW 22.

Angle Grinder Bosch GWS 7-125

Angle Grinder Bosch GWS 7-125

Art. no.: 469168

Smoother handle (176 mm), as compared to other angle grinders in the W-class, providing smooth and easy operation. Flat gearbox, provides smooth operation even in confined spaces. Vibration-proof kickback guard provides great user protection. Powerful 720 W continuous-use motor, only 1.9 kg. Custom air intake give optimal motor cooling and long life.

Tile Saw Dewalt DWC410

Tile Saw Dewalt DWC410

Art. no.: 354044

1300 W motor for cutting of granite, porcelain, concrete and other stone materials. 110 mm premium tile blade, which allows cutting of several different materials from ceramics to concrete up to 34 mm deep, wet or dry. Water hose and adjustable nozzle lead the water to the blade and reduce dust. Bevels 45° for fast angled cuts Lockable button reduce the user’s fatigue
Height adjustable saw foot for cutting at different depths. Quick-release coupling for both bevelling and depth setting minimises downtime. Easily accessible carbon brushes for fast and easy service.

Belt Sander Makita 9032

Belt Sander Makita 9032

Art. no.: 354132

Belt sander for most materials. The Polishing arm can be turned 100°. band speed adjustment when processing different materials. Max grinding depth: 110 mm. 6 mm and 13 mm polishing arms as accessories. Supplied with Sanding band.

Plan Grinder Makita BO3710

Plan Grinder Makita BO3710

Art. no.: 354133

Robust Sanders. Ergonomic rubber-covered handle. Large fasteners for quick change out of sanding paper. Easy to handle! Paper size 93x185 mm: Supplied with Sanding paper and dust bag.

Nibbler Makita JN1601

Nibbler Makita JN1601

Art. no.: 354134

A Nibbler that punches corrugated and trapezoidal plate with the same die. The Die holder swings 360°, Cutting direction in 90°-steps and the cutting rest attaches on the underside and leaves the surface clean.

Shear Makita JS1601

Shear Makita JS1601

Art. no.: 354166

Quick, straight and inclined cutting in metal. Easy and simple to handle; 1.4kg. Minimum curve radius 250mm. The cut material is removed through the middle of the line as a band and doesn’t make a mess of your environment. Supplied with tool key, side cutter 792533-6, Straight shear 792534-4.

Shear Makita JS1601

Glue Gun Steinel Gluematic 5000

Glue Gun Steinel Gluematic 5000

Art. no.: 1647376

Cordless electronically controlled adhesive gun with very high melt effect for bonding. Rechargeable adhesive gun with constant and high adhesive capacity. Equipped with an electronically controlled dual heating system that provides high gluing capability and rapid heating. 3 minutes heat-up time. For bonding of wood, heated floors, cardboard, cables, cabling ducts, boxes, etc. The holder serves as a charging station. Replaceable nozzles. Comes with charging station, 2 nozzles and 3 superglue rods. 11 mm glue rod. Melt temperature: 210-220 degrees. Flow-rate (Max) 22 g / min. 2-PCT heating technology. Mechanical feed. Non-drip nozzle.

Router Dewalt D26204K

Router Dewalt D26204K

Art. no.: 354203

Electronically-controlled speed control, which keeps the rotational speed constant, always gives the best finish for all materials such as wood, aluminium and plastic. Variable speed control 16000 to 27000. Compact, light construction. Motor house in aluminium and base construction. Adjustable table with double-handed grip and depth adjustment. 5 set depth modes. Supplied with 2 parallel guides, 2 dust extractor adapters, 8 mm clamp tong, 17 mm open-ended key, 2 tables - 1 fixed and 1 adjustable.

Reciprocating Saw Bosch GSA 1300 PCE

Reciprocating Saw Bosch GSA 1300 PCE

Art. no.: 374719

Balanced, anti-vibration handle. 1300W-high output motor with constant electronics for tough jobs. Constant oscillation allows faster sawing. SDS saw blade system provides fast and easy one-handed blade replacement. Constant LED lighting. Saw stop with toolless setting. Suspension hook. Rubberised gearbox provides safe and comfortable grip.
Saw blade metal S 123 XF (2 608 654 416) Craftsman case Saw blade wood S 2345 X (2 608 654 417).

Angle Drill Bosch GWB 10 RE

Angle Drill Bosch GWB 10 RE

Art. no.: 196464

Right / left running. Control electronics. Small rod motor. Countersunk chuck. Strong ball bearings. 2116 supplied with key chuck. Output 400 W.

Autof.screwdriver fein

Autof.screwdriver fein

Art. no.: 262753

Right / left running. Continuous electronic RPM regulation. Kinetics grip for great ergonomics. CLIC-STOP connection with quiet turn-off. The automatic part can easily be removed. Suitable for carpentry- and interior work. Drill bit holder with ¼" mount. Input 450W. Max screw diam. 5 mm. Supplied with machine, automatic parts hand strap, belt clamp, dust-shielded depth gauge, magnet holder and1 PH2 bit with dust ring.

Rotary Hammer Bosch GBH 3-28 DFR

Rotary Hammer Bosch GBH 3-28 DFR

Art. no.: 308925

High drilling rate and very high chiselling capacity. low vibrations thanks to Bosch Vibration Control. Replacement chuck provides fast changes between stroke drilling in concrete and drilling without stroke generator in wood and metal.

Saw blade fein e-cut

Saw blade fein e-cut

Art. no.: 261270

E-Cut Universal saw blade. Wide range of applications thanks to bimetal teeth. Saws wood up to 50 mm, plastic, sheet metal(400 N/mm) up to 2 mm, pipes and profiles in copper or aluminium.

Jigsaw Bosch GST 90 E

Jigsaw Bosch GST 90 E

Art. no.: 354184

Jigsaw in entry class. Powerful 650W motor with command electronics for continuous speed. Bosch tool-free saw blade change. Integrated vacuuming and on and off disconnect blow function for free view. Bend-tolerant steel leg plate.

Track Saw Flex MS 1706 FR 1400W

Track Saw Flex MS 1706 FR 1400W

Art. no.: 277549

FR electronics: constant speed, soft start, overload protection and temperature monitoring. The pivoting motor means that the machine is both forward and reverse drive (EP1693169). Optimal vacuuming and maximum safety thanks to the closed protective hood. Tool-free disc change and groove width setting. Rotatable suction adapter. Tool-free adjustable cutting depth. Dive lock for your safety. Mills two parallel grooves up to 35 mm deep and 30 mm wide. Breaking tool for removing remaining material, e.g. center strand. Standard equipment: 2 Diamantjet VI-Speedcut cutting disc 140 mm Ø. 1 side handle. 1 SDS-Clic quick-clamping nut M 14. Spacer. Stacking trays. Tension washer. 1 breaking tool. 1 extraction adapter. Cable holder. 1 transport bag.

Nibbler Bosch GNA 2,0

Nibbler Bosch GNA 2,0

Art. no.: 214978

Matrix rotary at 360° for curve formation without having to switch on the machine. Planet gear. Covered-over switch. Ideal for sheet metal works. Especially good for recesses of all kinds. Comes with punch and pad.

Metal Shears Dräco 3514-2

Metal Shears Dräco 3514-2

Art. no.: 5167428

Strain-free and chamfer free cut thanks to the fact that that the machine rolls up with 5mm breadth. Able to knock over the rim on canals up to 800mm in diam. 200mm minimum radii.

Metal Shears Dräco 3514-7R

Metal Shears Dräco 3514-7R

Art. no.: 5167440

Strain-free and chamfer free cut thanks to the fact that the machine rolls up with 7mm breadth. Biggest cutting capacity in mm; 2 mm. Least cutting radium 45mm.

Saw blade 217.786p -5 24t

Saw blade 217.786p -5 24t

Art. no.: 5168500

Sabre saw blade for S110VE 24TPI 5-pack. For material thickness 0.7-1.1mm.

Saw blade 217.808p -5 32t

Saw blade 217.808p -5 32t

Art. no.: 5168510

Sabre saw blade for S110VE 32TPI 5-pack. For material thickness below 0.7 mm.

Staple Gun Rapid 606

Staple Gun Rapid 606

Art. no.: 184087

Electrical. Recoilless. Universal magasine for double nails/nails. Regulation of stroke force by pressure. For clamp nailing in panel, roof plates, trim and diverse jobs in joinery and the furniture industry. 3.5m long connector cable. For clamps No.606, 12-25 mm and brad No.8, 15-25 mm. Adjustable stroke force for optimal adhesion in diverse materials. Incl. guide rail for fastening of panel clips Recoil-free adhesion safety lock.

Chuck adapter sds+

Chuck adapter sds+

Art. no.: 304642

Key chuck with adapter for SDS + attachment.

Showing 52 of 575