Order lines: 0

Ahlsell Products Tools & Machines Hand tools Puller toolBits sets

Bits sets

With good hand tools, you work more efficiently and get a better result. Ahlsell helps you find the hand tools for your job. We have hand tools for many different tasks. Our range of hand tools includes everything from hammers, wrenches, and jigsaws to scissors. You will also find pliers and complete tool sets. With hand tools, you also don't have to worry about charging batteries and electronics that break. Explore our wide range of hand tools online or visit your nearest Ahlsell store

Products (56)

Bit-/socket set Ironside 35 pcs

Bit-/socket set Ironside 35 pcs

Art. no.: 70923099

Bit/socket set ironside 1/4"

Bit/socket set ironside 1/4"

Art. no.: 280296

Plastic cassette with belt clips containing 29 parts. Mini ratchet wrench for bits and sockets, magnetic bit holder, 1/4"x5/16" adapter, 6 count 1/4" Super Lock case 6, 7, 8, 10, 12, 13 mm.
20 count 25 mm long bits of alloyed special steel: Straight heads 3, 4 ,5. Phillips 1, 2 (2 count), 3. Pozidriv no. 1, 2 (2 pcs), 3. Allen 3, 4, 5, 6. Torx with hole 15, 20, 25, 27, 30.

Bit Set Ironside Long 41-piece

Bit Set Ironside Long 41-piece

Art. no.: 742717

Bit rate Ironside 31 parts

Bit rate Ironside 31 parts

Art. no.: 379636

Includes one 60-mm drill bit chuck with magnet and Quick Release function, as well as 30 bits:
Slot 3, 4.5, 5.5
PH 1x2, 2x3, 3x2
PZ 1x2, 2x3, 3x2
TX 8, 9, 10, 15, 20, 25, 27, 30
Allen 2, 3, 4, 5, 6
Supplied in a compact plastic case with belt clip. Length in table refers to bit length.

Bit Belt Holder Ironside Power

Bit Belt Holder Ironside Power

Art. no.: 689701

Bit Belt Holder Ironside EL

Bit Belt Holder Ironside EL

Art. no.: 689698

Bit Belt Holder Ironside Allround

Bit Belt Holder Ironside Allround

Art. no.: 689697

Bit rate Ironside 71 parts

Bit rate Ironside 71 parts

Art. no.: 384920

Two-component box containing 71 parts; 1 bits holder, 1 square shaft for sockets as well as 60 x 25 mm bits and 9 x 75 mm bits of alloyed special steel with 1/4-inch attachment.
1 x drill bit holder 65 mm with magnet and Quick Release function.
1 x 1/4-inch square shaft 50 mm
25 mm bits:
PH 1x3, 2x6, 3x3
PZ 1x3, 2x6, 3x3
Slot 4.0x3, 6.0x3
TXT 10x3, 15x3, 20x3, 25x3, 27x3, 30x3, 40x3
Allen 4x3, 5x3, 6x3
75 mm bits:
PH 1, 2, 3
PZ 1, 2
Slot 4.0, 6.0
TXT 20, 25

Bits batch Ironside module 115 parts

Bits batch Ironside module 115 parts

Art. no.: 379651

¼" drill bits of alloyed special steel. 25 mm long.
1 bit chisel with magnet and Quick Release function
1 drill bit chisel 60 mm with magnet and Quick Release function
1 drill bit sleeve with ¼" connection
1 adapter for ¼" sleeves
1 hook and screwdriver drill bit
PH 0x1, 1x3, 2x5, 3x2
PH ACR 1, 2, 3
PZ 0x1, 1x3, 2x5, 3x2
PZ ACR 1, 2, 3
Track 3x4, 4.5x4, 5.5x4, 6.5x4
TX 5x1, 6x1, 7x1, 8x1, 9x1, 10x2, 15x2, 20x2, 25x2, 30x2, 40x2
TXT 5, 6, 7, 8, 9, 10, 15, 20, 25, 27, 30, 40
Allen 3, 4, 5, 6, 7, 8
Allen with hole 2, 2.5, 3, 4, 5, 6, 8
Torque set 6, 8, 10, ¼"
Square 0, 1, 2, 3
Spline 5, 6, 8
Tri-Wing 1, 2, 3, 4, 5
Spanner 4, 6, 8, 10, 12
Clutch 1, 2, 3
Supplied in a compact EVA foam box 403x188x30 mm

Bit rate Ironside 100 parts

Bit rate Ironside 100 parts

Art. no.: 374888

Two-component box containing 100 parts; 2 x drill bit holder and 98 x 25 mm alloyed special steel drill bits with ¼" bracket.
1 x drill bit holder 65 mm with magnet and Quick Release function
1 x 60 mm drill bit holder
PH 1x1, 2x7, 3x1
PH reduced 2x3
PZ 1x1, 2x7, 3x1
Track 3.5, 4, 5.5
TX 10x4, 15x7, 20x14, 25x7, 30x14, 40x4
TXT 5, 6, 7, 8, 9, 10, 15, 20, 25, 27, 30, 40
Allen 2, 2.5, 3, 4, 5, 6.
Square 1x2, 2x3, 3x1

Bit Cassette Wera Bit-Check 30 Impaktor 1

Bit Cassette Wera Bit-Check 30 Impaktor 1

Art. no.: 762231

1 Impaktor holder with snap ring and ring magnet, 29 Impaktor bits. The Impaktor technology optimally utilizes the material properties and has ideally adapted geometry for extra long life even under extreme demands. Particularly suitable for use with conventional impact screwdrivers. Holder with ring magnet for easy handling of long and heavy screws. Perfect also for overhead work. The robust diamond coating of the bits provides increased friction, preventing the blade from slipping out of the screw. Contains:
897/4 Impaktor R: 1 x 1/4" x 75 mm
855/1 IMP DC: 2 x PZ 1 x 25 mm, 3 x PZ 2 x 25 mm, 2 x PZ 3 x 25 mm
840/1 IMP DC: 1 x 3 x 25 mm, 1 x 4 x 25 mm, 1 x 5 x 25 mm, 1 x 6 x 25 mm
851/1 IMP DC: 2 x PH 1 x 25 mm, 3 x PH 2 x 25 mm, 2 x PH 3 x 25 mm
867/1 IMP DC: 1 x TX 10 x 25 mm, 1 x TX 15 x 25 mm, 2 x TX 20 x 25 mm, 3 x TX 25 x 25 mm, 2 x TX 30 x 25 mm, 2 x TX 40 x 25 mm.

Bit set Ironside 72 pcs

Bit set Ironside 72 pcs

Art. no.: 70923097

Bit set ironside 31 pcs

Bit set ironside 31 pcs

Art. no.: 280295

Plastic cartridge with belt clips containing 31 parts. Bit ratchet wrench with 60 balls and 2-component handle.
30 count 25 mm long bits of alloyed special steel: Straight heads 3, 4 ,5 ,6. Phillips 1, 2 (2 count), 3. Phillips with down-turned tip no. 2 (2 count). Pozidriv no. 1, 2 (2 pcs), 3. Allen 2, 3, 4, 5, 6. Square 1, 2, 3. Torx with hole 8, 10, 15, 20, 25, 27, 30, 40.

Bit Cassette Wera Bit-Check 12 Diamond 1

Bit Cassette Wera Bit-Check 12 Diamond 1

Art. no.: 468599

Plastic case containing bits holder with quick-gear chuck 889/4 / 1 K, and 11 x Bi-torx bits with diamond coating and colour coding. Length in table refers to bit length.
For Phillips type: 1 x PH1, 2 x and PH2.
For Pozidrive type: 1 x PZ1 and 2 x PZ2.
For Torx tracks: 1 of each TX10, TX15, TX20, TX25 and TX30.

Bit set wera toolcheck 1sb

Bit set wera toolcheck 1sb

Art. no.: 393976

Plastic case containing 38 pieces; lock socket wrench, Rapidaptor bit holder with quick-change chuck and recessed magnet. 7 x 1/4" sleeves; 5.5, 6, 7, 8, 10, 12, and 13 mm, 1 x 1/4" bit adapter and 28 x 25 mm long bits:
For flathead screwdriver 1.0x5.5
For philips head screwdriver PH1 (2 x), PH2 (3 x), PH3 (1 x)
For Pozidriv screwdriver PZ1 (1 x), PZ2 (3 x), PZ3 (1 x)
For Torx screwdriver TX10, TX15, TX20, TX25, TX30, TX40
For Torx screwdriver with centre tip TX10, TX15, TX20, TX25, TX30
For hex driver 3, 4, 5, 6, 8

Bit Cassette Wera Tool-Check PLUS

Bit Cassette Wera Tool-Check PLUS

Art. no.: 830610

Wera bit set in 39 pieces.
Contains:
8001 A bit ratchet ¼": 1x 1/4"x87 mm
813 Bit handle: 1x 1/4" x 78 mm
889/4/1 K Rapidaptor universal holder: 1x 1/4" x 50 mm
870/1 Tool shaft (adapter): 1x 1/4" x 25 mm
8790 HMA Zyklop socket screwdriver insert with 1/4" drive: 1x 5.5 x 23 mm, 1x 6 x 23 mm, 1x 7 x 23 mm, 1x 8 x 23 mm, 1x 10 x 23 mm, 1x 12 x 23 mm, 1x 13 x 23 mm
851/1 TZ Bits: 2x PH 1 x 25 mm, 3x PH 2 x 25 mm, 1x PH 3 x 25 mm
855/1 TH Bits: 1x PZ 1 x 25 mm, 3x PZ 2 x 25 mm, 1x PZ 3 x 25 mm
867/1 TZ TORX® Bits: 1x TX 10 x 25 mm, 1x TX 15 x 25 mm, 1x TX 20 x 25 mm, 1x TX 25 x 25 mm, 1x TX 30 x 25 mm, 1x TX 40 x 25 mm
867/1 Z TORX® BO Bits with hole: 1x TX 10 x 25 mm, 1x TX 15 x 25 mm, 1x TX 20 x 25 mm, 1x TX 25 x 25 mm, 1x TX 30 x 25 mm
840/1 Z Bits: 1x 3 x 25 mm, 1x 4 x 25 mm, 1x 5 x 25 mm, 1x 6 x 25 mm, 1x 8 x 25 mm
800/1 TZ Bits: 1x 1 x 5.5 x 25 mm

Bit set Bahco 59/S54BC

Bit set Bahco 59/S54BC

Art. no.: 569034

Magnet socket kit leaded

Magnet socket kit leaded

Art. no.: 365225

Kit with conductive and phosphated hexagonal power sockets with recessed magnets and 1/4" bracket in the six most common sizes: 1/4", 3/8", 7, 8, 10 and 13mm. Perfect for use with power tools in tight spaces. Handles forces up to 400kg / cm (straight) and 250kg / cm (angled) respectively. Delivered in a practical steel plate storage box.

Bit set wera kraftform

Bit set wera kraftform

Art. no.: 263413

Belt bag containing 17 parts; easy-grip handle - Power design with quick gear chuck. Bits 89 mm:
For flathead screwdriver 1.0x5.5
For Phillips type PH1, PH2, PH3.
For Pozidrive type PZ1, PZ2, PZ3.
For Torx tracks with center tip TX10, TX15, TX20, TX25, TX30
For internal hexagonal holes SW3, SW4, SW5, SW6

Kraft bit kit Ironside 31 parts

Kraft bit kit Ironside 31 parts

Art. no.: 404660

Power bit set, contains:
Fifteen (15) 32 mm long ¼" bits: PH1, PH2x2, PH3, PZ1, PZ2x2, PZ3. Tracks 4.5, 5.5. Allen 2, 3, 4, 5, 6.
Ten (10) 75 mm long ¼" bits: PH1, PH2, PZ1, PZ2, TX10, TX15, TX20, TX25, TX27, TX30
Four (4) 48 mm magnet sleeves: 7, 8, 10, 11 mm
One (1) 65 mm long power bit holder
Tilt-able locking handle with 24 cogs. Supplied in nylon case.

RATCHET SCREWDRIVER SET BAHCO 808050S-22

RATCHET SCREWDRIVER SET BAHCO 808050S-22

Art. no.: 309392

Set containing locking shaft 808050S - short model for bits. 17 bits: PH1, PH2, PH3, PZ1, PZ2, T10, T15, T20, T25, T27, T30, T40, grooved 4, 5, 5.5, 6.5, 1/4". Socket adapter 1/4"x1/4", bit holder 50 mm med 1/4" square pin/1/4" hexagonal. Flexible socket adapter 150 mm 1/4"x1/4". Drill bits adapter 1/4"x1/4".

Bit set ironside w 12 long

Bit set ironside w 12 long

Art. no.: 310322

Contains 12 x 1/4" double bits, length 160 mm: screwdriver slot 4-5-6-7mm, Phillips cross no. 1-2-3, Pozidriv no. 1-2-3, Torx 6-7-8-9-10-15-20-25-30-40, socket head cap screw 3-4-5-6 as well as 1 x combo screwdriverl/T-handle. Supplied in metal box.

Bit set wera impaktor

Bit set wera impaktor

Art. no.: 357657

The Impactor technology gives an above average service life even under extremely high demands. Particularly suitable for use together with a hammer screwdriver. Rough diamond coating stops the bits from Sliding out of the screw. Plastic cassette containing Impactor holder with stop ring and ring magnet, together with 9 x 25 mm long ¼" Impactor bits: PH2, PH3, PZ2, PZ3, TX25, TX30, TX40 Insex 4.0 and Insex 5.0.

Bit set wera bit-check 6

Bit set wera bit-check 6

Art. no.: 357658

The Impactor technology gives an above average service life even under extremely high demands. Particularly suitable for use together with a hammer screwdriver. Rough diamond coating stops the bits from Sliding out of the screw. Plastic cassette containing 6 x 50 mm long pre-coded ¼" Impactor power bits: PH2, PH3, PZ2, PZ3, TX25 and TX30.. Lengths in the table refers to the bit lengths.

Bit set ironside standard

Bit set ironside standard

Art. no.: 260585

Sheet metal containing quality bits where each bit has a designated place. The set also includes bit screwdriver with ergonomic two-component handle, quick gear chuck and magnet and bit holder with magnet.
For straight tracks - 3 count each of 3, 4.5, 5.5, 6.5.
For Philips cross tracks - 3 count no. 1, 5 count no. 2, 2 count no. 3.
For Posidriv cross tracks - 3 count no. 1, 5 count no. 2, 2 count no. 3.
For Torx tracks - TX5, TX6, TX7, TX8, TX9 and 2 count each of TX10, TX15, TX20, TX25, TX30, TX40.
For Insex - 3, 4, 5, 6, 7, 8 mm.
Hook and screw eye pieces.
Adapter for ¼" sockets.
Bit adaptor with ¼" connection.
Bit holder with magnet.
Bit chisel with magnet.

Bit set ironside special

Bit set ironside special

Art. no.: 260586

Sheet metal containing quality bits intended for the most frequently occurring safety and special screws to be found in electrical devices, switchboard, elevators, machinery, etc. The set is also supplemented with a selection of the most common track and cross bits.
Insex with hole - 2, 2.5, 3, 4, 5, 6, 8
Torx with hole - TX5, TX6, TX7, TX8, TX9, TX10, TX15, TX20, TX25, TX27, TX30, TX40
Spline - XZN5, XZN6, XZN8
Clutch - C1, C2, C3
Torq set - 6, 8, 10, ¼"
Tri-Wing - TW1, TW2, TW3, TW4, TW5
Spanner - 4, 6, 8, 10, 12
Square - SQ0, SQ1, SQ2, SQ3
Phillips ACR - PH0, PH1, PH2, PH3
Pozidriv ACR - PZ0, PZ1, PZ2, PZ3
Track - 3, 4.5, 5.5, 6.5.
Hook and screw eye pieces
Adapter for ¼" sockets Bit socket with ¼" connection Bit holder with magnet Bit chisel with magnet

Bit/socket set ironside

Bit/socket set ironside

Art. no.: 291998

Plastic cassette containing 24 parts. Magnetic bit holder 1/4" socket adapter, 5 x 65 mm long magnetic sockets 8, 10, 11, 13 mm as well as 1/4".
16 x 25 mm long bits of alloyed special steel: Phillips 1, 2, 3. Phillips with down-turned tip no. 2. Pozidriv no. 1, 2, 3. Square 1, 2, 3. Torx 10, 15, 20, 25, 30, 40.

Bit rate Ironside long bits 22 parts

Bit rate Ironside long bits 22 parts

Art. no.: 384921

Plastic cartridge containing 22 parts; 1 bits holder, 1 square shaft for sockets as well as 20 long torx bits with holes.
1 x drill bit holder 65 mm with magnet and Quick Release function.
1 x 1/4-inch square shaft 50 mm
50 mm bits: TXT 10x2, 15x2, 20x2, 25x2, 27x2, 30x2, 40x2
90 mm bits: TXT 10, 15, 20x2, 25, 30

Bitsbelt Holder Ironside Ventilation

Bitsbelt Holder Ironside Ventilation

Art. no.: 384904

With belt clips. Includes 16 parts:
¼" magnetic bit holder with Quick release function, 4 x HSS drills with hexagonal bracket; 3.3, 3.3, 4.1, 4.9 mm, 2 x magnetic sleeves; 6 and 8 mm respectively, 8 x 25 mm long
¼" bits; Slots 6mm, PH2, PH3, TX20, TX25, TX30, Square 2, 3 mm, 1 x 70 mm long ¼" bits; PH2.

Ratchet Screwdriver Set Bahco 808050S-18

Ratchet Screwdriver Set Bahco 808050S-18

Art. no.: 11667753

Set with a ratchet screwdriver for 1/4" bits in a short model, bits, and sockets. Lightweight and handy box with rounded corners. Removable blade with square mount.
Contains:
1 removable blade with square mount, short model ratchet screwdriver
8 pcs S2 zinc-plated bits: PH 1, PH 2, PZ 1, PZ 2, T-15, T-20, SL 4, HEX 3
1 pc 1/4" x 1/4" socket adapter
1 pc hex bit holder 1/4" x 1/4", 50 mm (replaceable type)
1 pc 1/4" flexible square adapter 150 mm
1 pc 1/4" x 1/4" bit adapter
5 pcs 1/4" sockets: 4, 5, 6, 7, 8 mm
17 pcs S2 zinc-plated bits: PH 1, PH 2, PH 3, PZ 1, PZ 2, T-10, T-15, T-20, T-25, T-27, T-30, T-40, slot 4, 5, 5.5, 6.5 mm, slot 1/4"
1 pc 1/4" x 1/4" socket adapter

Bit Cassette Wera Bit-Check 10 TX Universal

Bit Cassette Wera Bit-Check 10 TX Universal

Art. no.: 468597

Plastic case containing universal holder with quick-gear chuck 894/4 / 1K and 9 torx bits for Torx tracks, 1 pc of each TX8, TX9, TX10, TX15, TX20, TX25, TX27, TX30 and TX40. Length in the table refers to bit length.

Bit cassette Wera Bit-Check 12 Bitorsion 1

Bit cassette Wera Bit-Check 12 Bitorsion 1

Art. no.: 468600

Plastic case containing bits holder with quick-gear chuck 889/4 /1 K, and 11 x Bi-torx bits with colour coding. Length in table refers to bit length.
For Phillips type: 1 x PH1, 2 x and PH2.
For Pozidrive type: 1 x PZ1 and 2 x PZ2.
For Torx tracks: 1 of each TX10, TX15, TX20, TX25 and TX30.

Bit Cassette Wera Bit-Check 30 Metal 1

Bit Cassette Wera Bit-Check 30 Metal 1

Art. no.: 468603

Plastic case with bits holder with magnet and ring 899/4/1 K, and 29 x bits. Length in table refers to bit length.
For straight tracks: 1 of each 4.5, 5.5 and 6.5.
For Phillips type: 3 x PH1, 3 x PH2 and 2 x PH3.
For Pozidrive type: 3 x PZ1, 3 x PZ2 and 3 x PZ3.
For Torx tracks: 1 of each TX10, TX15, TX20, TX25, TX30 and TX40.
For internal hexagon holes: 4.0, 5.0 and 6.0.

Bit Cassette Wera Bit-Check 30 Universal 1

Bit Cassette Wera Bit-Check 30 Universal 1

Art. no.: 468604

Plastic case containing bits holder with quick-gear chuck 889/4/1 K, and 29 x torx- and universal bits. Length in table refers to bit length.
for straight tracks (TZ): 1 x 5.5
For Phillips cross tracks (TZ): 2 x PH1, 3 x PH2 and 1 x PH3.
For Pozidrive cross tracks (TH): 2 x PZ1, 3 x PZ2 and 1 x PZ3.
For Torx tracks (TZ): 1 of each TX10, TX15, TX20, TX25, TX30 and TX40.
For Torx tracks with centre tip (Z): 1 of each TX10, TX15, TX20, TX25 and TX30.
For internal hexagon holes (Z): 3.0, 4.0, 5.0, 6.0 and 8.0.

Bit kit Wera Power form Compact 100

Bit kit Wera Power form Compact 100

Art. no.: 468605

Textile case containing 52 parts:
Drill bit handle with quick-gear chuck 813 R.
Drill bit holder with quick-gear chuck 889/4/1 K.
8 x Allen keys: 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0 and 8.0.
12 x 50 mm long power bits: 2 x PH2, 1 x PH3, 2 x PZ2, 1 x PZ3, 1 x TX25, 1 x TX30, 1 x TX40, 1 x allen 4.0, 1 x allen 5.o and 1 x allen 6.0.
30 x 25 mm bi-torx bits and extra durable universal bits:
For straight tracks (BTZ): 1 pcs 0.8x5.5 and 1 pcs 1.0x5.5.
For Phillips cross tracks (BTZ): 2 x PH1, 4 x PH2 and 2 x PH3.
For Pozidrive cross tracks (BTH): 2 x PZ1, 4 x PZ2 and 2 x PZ3.
For Torx tracks (BTZ): 2 x TX10, 2 x TX15, 3 x TX20, 2 x TX25, 2x TX30 and 1x TX40.

Bit rate Ironside 56 parts color code

Bit rate Ironside 56 parts color code

Art. no.: 374813

Impact Bit Set Ironside 42 Pcs

Impact Bit Set Ironside 42 Pcs

Art. no.: 554618

Bit set Ironside Slot/PH/PZ

Bit set Ironside Slot/PH/PZ

Art. no.: 546483

Bit set Ironside Slot/PH/PZ

Bit set Ironside Slot/PH/PZ

Bit Set Ironside Torx/Hex

Bit Set Ironside Torx/Hex

Art. no.: 546486

Bit Set Ironside Torx/Hex

Bit Set Ironside Torx/Hex

Bit Set Ironside 11-Piece

Bit Set Ironside 11-Piece

Art. no.: 549101

Bit Belt Holder Ironside Plumbing

Bit Belt Holder Ironside Plumbing

Art. no.: 689699

Bit Belt Holder Ironside with Long Bits

Bit Belt Holder Ironside with Long Bits

Art. no.: 689700

Bit/Socket Set Ironside 71-Piece

Bit/Socket Set Ironside 71-Piece

Art. no.: 716138

Bit set Bahco 59/S36BCR

Bit set Bahco 59/S36BCR

Art. no.: 725159

Bit Cassette Festool TX 10-50/BH-SORT/31x

Bit Cassette Festool TX 10-50/BH-SORT/31x

Art. no.: 708383

Power Bit Set Ironside 31 pieces

Power Bit Set Ironside 31 pieces

Art. no.: 742815

Bit Set Wera Bit-Check 6 Torx Impactor 1

Bit Set Wera Bit-Check 6 Torx Impactor 1

Art. no.: 762232

Long Bit Set Ironside 10 pieces

Long Bit Set Ironside 10 pieces

Art. no.: 34699568

Bit Set Ironside 32-Piece Standard

Bit Set Ironside 32-Piece Standard

Art. no.: 763183

Bit Set Ironside 32-Piece Special

Bit Set Ironside 32-Piece Special

Art. no.: 763184

Ironside Bit Socket Set

Ironside Bit Socket Set

Art. no.: 48666921

Impact bit set Ironside 76 pcs

Impact bit set Ironside 76 pcs

Art. no.: 70923095

Showing 52 of 56