Order lines: 0

Ahlsell Products Electric Telecoms, Data, Security 50-6358 Access systems, entryphone systems

58 Access systems, entryphone systems

Entryphone services

Electric strike plates and motor lock

Do you work with Telecom, Data, or security? Ahlsell helps you find the products within security and integration. Whether you work in electrical engineering, burglar alarms, or access systems, we have the range you need. Here you will find fiber optics, telephony, antenna material, and power supply for installation, along with smart solutions from major suppliers. Explore our wide selection here in the online store or visit your nearest Ahlsell store.

Code lock A66, Axema

Code lock A66, Axema

Art. no.: 5870494

VAKA reader (Mifare and EM) for contactless cards or tablets. A66is ensconced in a sturdy and resistant metal cladding for outdoor use. Interactive dialog-controlled display features major advantages as regards user friendliness, and a number of manoeuvres are easy to perform with the assistance of the 4 function buttons. Button set can be used for personal code (PIN) in,for example, noise control or for a group code at certain times. The inbuilt loud-speaker emits audible signals at the press of a button warnings, noise (sabotage, etc.), as a portable telephone as well as voice messages. Reading distance is ca 7 cm with EM-tablet, 2-4cm with Mifare tablet, and up to 100m with handheld transmitter. A66 is connected by 4-wire B-27 or B-17 for up to a distance of 150. Built-in relay for alternative lock control locally at door. Attention: A66 can be used as compact unit without door panel. control.
Sturdy lockable metal housing.
Metal buttons
- Reader EM4200/4102 and Mifare
radio reader for transmitter RN18
Clear text display
Background
- Integrated speakers
Green diode = locked/unlocked
Yellow diode for PIN
Red diode for noise indication
Built-in Post IR opening
- Temperature: -30° to +55°C
Power: from central door panel
- Power consumption: 45 mA
- Dimensions: 184x87x27 (HxWxD)

Code lock Codoor CD30, Vanderbilt

Code lock Codoor CD30, Vanderbilt

Art. no.: 5801223

Vanderbilt's Codoor fits easily directly on interior doors, incorporates an electronic code lock with mechanical locking device and a battery unit in the same enclosure. This means that there is no need for wiring and the door frame does not need to be changed. The result is a very simple installation and takes only a few minutes per door.

Technical data:
Operating voltage: 9VDC. Two batteries, 9V 6LR61 (not included).
Operating time: Approx 1 year.
Code capacity: Nine 4-digit codes.
Working temperature: 0 to +50 C.
Environment: Indoor use only.
Enclosure class: IP30

Combi reader A63, Axema

Combi reader A63, Axema

Art. no.: 5870493

VAKA combi-reader (Mifare and EM) for contactless cards or tablets. A63 is ensconced in a sturdy and resistant metal cladding for outdoor use. Button set can be used for personal code (PIN) in,for example, noise control or for a group code at certain times. The inbuilt loud-speaker emits audible signals when buttons are pressed, and when triggered by warnings, alarms (tampering, etc.), and voice messages. Reading distance is ca 7 cm with EM-tablet, 2-4 cm with Mifare tablet. A63 is connected by 4-wire B-27 or B-17 for up to a distance of 150 m. NB! A63 does NOTE have the Post IR or local lock relay.
Sturdy lockable metal housing.
Metal buttons
- Reader Mifare and EM4200/4102
- Back-lit numbers
- Integrated speakers
Green diode = locked/unlocked
Yellow diode for PIN
Red diode for alarm indication
- Temperature: -30° to +55°C
Power: from central door panel
- Power consumption: 35 mA
- Dimensions: 184x87x27 (HxWxD)

Cable loop, RCO

Cable loop, RCO

Art. no.: 5870890

R-Connect is a surface-mounted frame transfer, complete set for frame width 13mm

Code lock Easy Access / Nimly FingerTouch touchscreen

Code lock Easy Access / Nimly FingerTouch touchscreen

Art. no.: 5868045

Make your front door smarter with nimly Touch Pro and create an easier life. Not just when you leave home or come home. Developed and manufactured according to our Nordic climate conditions. Extra security with the included mechanical emergency key. Open the door with your fingerprint, code or key fob. With an emergency key, you have the security of being able to open the door mechanically if, for example, the batteries run out. Prepared for our communication module for remote control via app with our gateway or other compatible smart home solution. You get features like auto-lock, stand-up mode & code camouflage feature. Leave your home easily and safely with the EasyExit function, inner handle is always open for evacuation.

Code lock Easy Access / Nimly FingerTouch touchscreen

Combi card PM-502 (mif,mag), RCO

Combi card PM-502 (mif,mag), RCO

Art. no.: 5870784

Combi-tag for RCO systems where Mifare / EM uses the same ID number

Combi card PM-502 (mif,mag), RCO

Combi card PM-502 (mif,mag), RCO

Combi card PM-502 (mif,mag), RCO

Art. no.: 5870785

MIF tag for RCO system

Card case

Art. no.: 5875422

Plastic card holder with installed clip. Suitable for attachment to belt or breast pocket, for CR-80 cards.

Vandal-proof reader MIF-66 for entry security, RCO, RCO

Vandal-proof reader MIF-66 for entry security, RCO, RCO

Art. no.: 5870762

The MIF-66 for exit is one of the market's smallest non-contact readers, which makes it both discreet and easy to place. It can be mounted on the door frame or directly on the door. This model can withstand hard blows such as blows, kicks and fire with an open flame. MIF-66 is made of macrolone which is a very impact-resistant material. The MIF-66 is connected to DB or DIO in the R-CARD 5000 system and has a five-meter finished cable. It also serves as an initiation reader for NoKey offline.

Vandal-proof reader MIF-66 for entry security, RCO, RCO

Prox tag PR-4 red, Axema

Prox tag PR-4 red, Axema

Art. no.: 5877177

Non-contact key fob for reading in proxim readers, adapted for most brands marketed in Sweden. Laser engraved ID code makes it easy to identify which numbers to use for programming. Group / series login can be used to advantage when the tiles are delivered in numerical order,

Code locks A04, Axema

Code locks A04, Axema

Art. no.: 5877040

Compact code lock for indoor and outdoor use, in a very robust metal casing. Leading qualities of A04 the the extremely simple programming procedure, which is possible, thanks to four function buttons on the code lock. Button 1, 2 and 3 are used to programme/change respective codes, and the 4th button to set the opening time on the relay. Alternatively a 6 digit master-code can be used for programming.
The inbuilt loud-speaker emits audible signals when buttons are pressed, and whilst programming. The relay is a solid state relay which isn’t affected by vibrations or magnetic fields.

Radio key Vaka, Axema

Radio key Vaka, Axema

Art. no.: 5870464

Radio key for VAKA and radio module C18. 4 buttons (A,B,C,D) (unique ID codes) 868 Mhz. Elegant design with sliding lock that protects against accidental push of a button. Range depending on external circumstances 5-100.

Relay box IO-5022 Gen2

Relay box IO-5022 Gen2

Art. no.: 5872028

I/O unit (in/out unit) with 2 inputs and 2 outputs. Used to connect accessories such as electric lock, opening button, door detection, door automation, elevator control and other possible accessories. Connects to UC-50 via local bus RS-485. Supply voltage: 10-27.3VDC. Current consumption: Max 34mA @24VDC.

Access controller B27, Axema

Access controller B27, Axema

Art. no.: 5871091

VAKA B27 is a complete central unit for a door, with integrated software.B27 supports the new Power over Ethernet standard 802.3at (PoE+) which means that a single cable is sufficient for all functions of the door environment. Altogether, there are 7 relay outputs and 4 inputs for, for example, Day and Night locks, noise control, door controls etc. B27 manages the reader for passing in and out and is part of a VAKA system with one to ten door environments. Built-in calendar and registration of the 5,000 latest events.
Lockable Plastic enclosure with display
- Reader interface: 4-wire 150m
- Switch with 2 RJ45 ports
- Integrated Java software
- Power over Ethernet support 802.3 at.
- Lock control
- Door monitoring (closed / locked)
- Input for remote opening
Place for 2 modules for special functions
Support for Day&Night locks
Support for automatic door mechanism
ASF noise control with prior alert
Door/Lock warning jack
Door/lock/sab alarm jack
Aux jack (buzzer alarm,etc.)
- Temperature: 0° to + 55° C
- Voltage: PoE 802.3at / 10-30V DC
- Consumption: 65 mA (at rest) mA (max)
-Max load over relay contacts: 1 A 30V DC
- Dimensions: 180x280x60 (HxWxD)

Electric strike plate ES 17, Safetron

Electric strike plate ES 17, Safetron

Art. no.: 5866364

STEP 40 Preload is a minimal electrical end plate that sets a high standard and is suitable for day locking. The well-known STEP quality in combination with strip printing technology provides a high level of operational reliability. Operational reliability that works in reality The Preload series combines minimal dimensions with very high performance for doors with normal safety requirements. The electrical end plate has a very high operational reliability and has been tested for high opening frequency. STEP 40 Preload is available as an adjustable so that the function of the electrical end plate can be easily selected and changed during installation. This creates greater flexibility and lower handling costs. Aesthetic assembly and easy installation Due to its small dimensions, the electrical end plate with a small adjustment fits into the recess for the door frame's standard end plate. Current consumption 0 mA for torque at rest (upright = locked, reverse = unlocked)

Connection module TEL-50

Connection module TEL-50

Art. no.: 5802015

Connection module for connection to RTU and telephone jack. Connected when the PA-57 or FreeCall is to be used.

Holder Yo-Yo Mini rotatable, Axema

Holder Yo-Yo Mini rotatable, Axema

Art. no.: 5877187

Yo-Yo Mini is a small compact key holder in plastic, with extra long line and a key ring. An innovative design with a rotating enclosure means that the cable runs easier and lasts longer.

Code lock V42, Vanderbilt

Code lock V42, Vanderbilt

Art. no.: 5811010

K42 is the world's best-selling code lock and is a simple, compact code lock with a modern design for mounting both indoors and outdoors. With two codes, for example, for a residence, you can use one for employees and tradesmen, cleaners or mail carriers can use the other code. Half a second delay will make it almost impossible to get the right code with trial and error. Code reset occurs through a pin. The button set is backlit. Recessed box BB3 is used for a recess and protective hood SH1 or SH2 are recommended for surface mounting.
Cast metal with the buttons in stainless steel and with a safety lock.
Inputs: Exit request function with delay. Two separate inputs for voltage of each code.
Protection class (IP): IP54
Power consumption: 8 mA at rest
Output: Potential-free, alternating relay, max. 1A, 28 V DC

Reader non-contact (card + pin) PP500EM

Reader non-contact (card + pin) PP500EM

Art. no.: 5871040

PP500EM is a small and robust non-contact card reader for Bewator Entro door centre DC12 and DC22 or Bewator Entro Lite DC800. Two readers can be used for in/out access. The button set is backlit. Recessed box BB3 is used for a recess and protective hood SH1 or SH2 are recommended for surface mounting.
Technical data:

Open button AXKK, Axema

Open button AXKK, Axema

Art. no.: 5877159

AXKK is an opening button connected to the product's remote opening input, and a press of the button allows an approved exits. The button is spring-loaded and provided with a clear key symbol.

Holder Yo-Yo HD

Holder Yo-Yo HD

Art. no.: 5877186

Yo-Yo HD is a robust key holder in metal, extra strong and with a large key ring. Suitable for tougher use, and if you want to have several keys and badges available.
Technical data:

Transformer TF-5

Transformer TF-5

Art. no.: 5208180

The TF-5 is an electronic transformer specially designed for installations with electromechanical locks for 24VDC. With 27,2 V 1A stabilised power supply, TF5 is the ideal safety transformer; it handles the electrical locks available on the market, and it also accommodates commonly found long and thin cables. The TF-5 is intended for permanent installation.
Technical data:
Plastic enclosure
Assembly: DIN / solid wall
27.2V Stabilised
1 A max load
Double outputs
Temperature: 0° to + 55° C

Pushbutton surface-mounted

Pushbutton surface-mounted

Art. no.: 5875418

White pushbutton with key symbol, surface-mounted, NC, NO.

Pushbutton recessed

Pushbutton recessed

Art. no.: 5875419

White pushbutton with key symbol, for recessed mounting in box, NC, NO.

Rain shield RS2, RCO

Rain shield RS2, RCO

Art. no.: 5875415

Rain cover for MAG/DAL/PROX/R-CARD 996. The rain cover should be installed where the reader may be exposed to rain. Made of Plexiglas.

Rain shield RS-5, RCO

Rain shield RS-5, RCO

Art. no.: 5875417

Rain cover for the R-COD 500, MAG, DAL, and SMART readers and the PROX 50/60. Made of UV-resistant PVC.

Auxiliary relay 1-pole 1-9020-0, Axema

Auxiliary relay 1-pole 1-9020-0, Axema

Art. no.: 5877168

An auxiliary relay with an alternating contact. Connection of fixed plus or minus voltage causes the contact to switch until the voltage disappears. The small format with self-adhesive mounting base means that the relay fits into many existing products and provides many opportunities where potential-free closing is needed. The relay has a special place in a professional installer’s tool box.
Technical data:
- Outputs: 1 alternating
- Light emitting diode shows the relay is pulled
- Temperature: -40° to +70°C
- Voltage: 9-30V DC
- Power consumption: 0mA (rest/12V) 16mA (max/12V)
-Max load over relay contacts: 1 A 30V DC
- Dimensions: 16x37x18 (HxWxD) incl. base

Protective hood for combination code lock SH2

Protective hood for combination code lock SH2

Art. no.: 5804997

In vulnerable environments you can install a protective visor. The protective visor SH2 is a tailor made code lock model. There are recesses in the protective visor for cabling which means it’s even easy to complement existing installations. SH2 Is placed between the wall and the back of the keypad.

Magnetic card IB1

Magnetic card IB1

Art. no.: 5871160

It is important to choose the right pass cards and badges that can be used in pass systems. We offer a number of different cards and badges for many Bewator readers. The type of products varies depending on e.g. reading distance, capacity, lifetime and cost. Options like tailor-made cards, coloured cards, cards intended for visit management, etc. are available in the range.
A magnetic card is a well know card type which can be used in many Bewator readers. The card is of CR80 standard type and contains the prerequisite 8 digits. Certain contactless cards have a magnetic strip making a combination possible.
IB1 The card is of CR80 standard type and contains the prerequisite 8 digits.

Key fob IB44EM

Art. no.: 5871219

It is important to choose the right pass cards and badges that can be used in pass systems. We offer a number of different cards and badges for many Bewator readers. The type of products varies depending on e.g. reading distance, capacity, lifetime and cost. Options like tailor-made cards, coloured cards, cards intended for visit management, etc. are available in the range.
Passive contactless key tag with EM technology.
Works with card readers with EM4102 reader technology.

Telephone module master C10, Axema

Telephone module master C10, Axema

Art. no.: 5877475

Module entry phone master unit. Mounted in door panel B26 or B27 and connected to reader terminal and keypad (A66, A56 or A53) can be used as a door entry phone. If fitting an entry phone to more than one door, other B26/B27 can be supplemented with the C11 module.
Technical conditions:
- Internet connection with VoIP subscription, analogue telephone jack or internally on local network.
- VoIP via standard SIP protocol

Telephone module slave C11, Axema

Telephone module slave C11, Axema

Art. no.: 5877476

Module entry phone slave. Mounted in door panel B26 or B27 and connected to reader terminal and keypad (A66, A56 or A53) can be used as a door entry phone. At least one door in the system must have the C10 master unit installed.
Technical conditions:
- Internet connection via VoIP subscription
- VoIP via standard SIP protocol

Domaine controllers B60, Axema

Domaine controllers B60, Axema

Art. no.: 5870517

Central for VAKA systems over 10 doors and up to 50 doors, up to 80,000 people / card. Has a WAN page and a LAN page, built-in router, firewall, DHCP client. Can be fed with PoE via the LAN side. Has two module slots pre-expanded functionality.

Combi reader A61, Axema

Combi reader A61, Axema

Art. no.: 5870552

VAKA “garage reader" without buttons connected to door center B27 or B17 (150 m). Robustly built in a durable metal housing for outdoor use. User-friendly with reading for EM (8-10 cm), Mifare (2-4 cm) and Radio key RN18 (5-100 m). Does not have a local locking relay, not Posten-IR and not for door telephony.

Door alarm UDR-Plus, Axema

Door alarm UDR-Plus, Axema

Art. no.: 5870725

UDR-Plus is a compact door alarm with a number of setting options and is a ready-made solution for escape doors of standard EN179 or EN1125. UDR is used for monitoring staff and back doors in many environments; shops, offices, sports halls, department stores are some examples.

Rain shield RS-9, RCO

Rain shield RS-9, RCO

Art. no.: 5870764

Rain cover intended for readers MIF-509, PROX / MIF-509 and MIF / PROX-65. Made of 4 millimeter UV-stabilized PVC.

Weather cover SKHV-A Guard, Axema

Weather cover SKHV-A Guard, Axema

Art. no.: 5877474

Tailor-made weather protection in impact-resistant lexan plastic for code locks A04 and A05, as well as WAKE readers A63, A66, A56 and A52.
Dimensions Exterior: 197x93x83 mm (HxWxD)
Dimensions Interior: 195x90 mm (HxW) "

Tag touchless black Mifare, Axema

Tag touchless black Mifare, Axema

Art. no.: 5870765

Non-contact Mifare badge with laser engraved numbers for the following brands. (MfD) ASSA. (AM) Axema, (RM) RCO. The Mifare tags use the Mifare classic original chip and are delivered black in a neutral design without a company logo.

Prox tag PR6 EM orange, Axema

Prox tag PR6 EM orange, Axema

Art. no.: 5870830

Non-contact key fob EM with Axema logo. ID coded in numerical order for most access control systems. Delivered in 10-pack.

Cable loop R-card

Cable loop R-card

Art. no.: 5868527

Powerful frame transfer including wall mounts that replace recessed models, but still meet the requirements for vandal-proof transfer - while saving both time and money. By supplementing with a wire that is anchored on the inside of the end pieces, a very strong frame transfer is achieved. Anchoring in the wall and door leaf is important.

Cable loop, RCO

Cable loop, RCO

Art. no.: 5868530

Frame transfer including wall brackets.

Vandal-proof reader MIF-66 for exit security, RCO

Vandal-proof reader MIF-66 for exit security, RCO

Art. no.: 5870761

The MIF-66 for access is one of the market's smallest non-contact readers, which makes it both discreet and easy to place. It can be mounted on the door frame or directly on the door. This model can withstand hard blows such as blows, kicks and fire with an open flame. MIF-66 is made of macrolone which is a very impact-resistant material. The MIF-66 is connected to DB or DIO in the R-CARD 5000 system and has a five-meter finished cable. It also serves as an initiation reader for NoKey offline.

Vandal-proof reader MIF-66 for exit security, RCO

Rain shield RS-7, RCO

Rain shield RS-7, RCO

Art. no.: 5875497

Rain cover for PA / MAP-59 and Vision Light. Made of stainless steel

Code lock Nokey Prox-508 KC03, RCO

Code lock Nokey Prox-508 KC03, RCO

Art. no.: 5870447

NoKey offline MIF-508 KC03 with Prox or Mifare reader and keypad for interior and exterior doors for ova or rundl cylinder and knobs are part of a series of readers with the great advantage that they do not damage the door during installation or require any wiring at all - in other words, the installation will be both smooth and cost-effective. In an offline system, it is the cards or tags that transfer permissions to the offline readers. In the same way, event logs are transferred from the offline readers back to the system when the user passes an online reader. Since all connection and mechanics are on the inside of the door, manipulation and sabotage are significantly hampered, which means higher security compared to products where everything is on the outside. Opening with a knob or handle from the inside affects the lock completely mechanically, which means that it is always possible to get out. RCO's online reader (Mifare) of newer model works as an initiation reader for NoKey offline, so no separate readers are needed for this purpose. All programming is also managed from the R-CARD M5 software

Code lock Nokey Prox-508 KC03, RCO

Display Reader 509, KS Series, RCO

Display Reader 509, KS Series, RCO

Art. no.: 5870880

The touchless 509 reader is fully integrated into the R-CARD 5000 system and fits just as well as inside. The reader offers an illuminated keypad and a large 2.8-inch color display for displaying graphic symbols and text. The display shows the most common passport prompts with large clear icons, such as “Show card" or “Enter code." In the same way, the user gets quick feedback on the status of the door, for example if it is unlocked or if the alarm is switched on. The reader also has a built-in permission-controlled menu system for the door controls that are performed less frequently, for example, the user can easily change the pin code directly in the reader, switch on and off alarm areas or "buy time" - all with a unique clear handling thanks to the large screen and menu system. The 509 reader can be used as an initiation reader for NoKey offline Juds either with the reading technology Mifare Classic or as a combination with both Mifare Classic and Prox.
NOTE: 5870879 and 5870880 are without TB-485.

Display Reader 509, KS Series, RCO

Electric strike plate ES 17, Safetron

Electric strike plate ES 17, Safetron

Art. no.: 5866603

Powerful electric end plate with unique performance. STEP 60 Silent is a new generation of electric end plates with superior technology adapted for single and double fall locks. Patented STEP technology gives the door a smooth passage and an almost silent opening and closing. Fire approved up to E / EI 120. STEP 60 Silent has unique opening and closing properties that provide a very wide range of applications.A soft and quiet passage together with the strong construction means that STEP 60 Silent fits perfectly in doors that are used frequently or where a reduced noise level is desired. the door environment in, for example, apartment buildings, offices, schools and hospitals STEP 60 Silent provides high intrusion safety through a unique torque that takes the entire piston lock, high breaking strength and an electrically operated knock protection that makes it impossible to manipulate the locking function. Current consumption 0 mA for torque at rest (upright = locked, reverse = unlocked). "

Vandal protection for 509 readers

Vandal protection for 509 readers

Art. no.: 5801234

An extremely durable protection for the 509 reader's edges and display where the keypad is still available for commands and tag or card loading.

Terminal bus card TB-485

Terminal bus card TB-485

Art. no.: 5870881

TB-485 terminal bus card for connecting 509 readers to DB, DIO.

Elbow contact AK1-2-6

Elbow contact AK1-2-6

Art. no.: 5877326

Elbow connector made of impact-resistant ABS plastic. The connector is primarily intended for indoor use but can also be placed outdoors as it has a moisture-proof microswitch. As an accessory, there is a complete set of microswitches and mounting details. The protective hood is made of 1.25 mm stainless steel with brushed surface. Supplied with mounting holes where the elbow connector can be mounted together with the protective hood directly on the surface.
with text doorway

Elbow contact AK-3

Elbow contact AK-3

Art. no.: 5877328

Made of aluminum. The contact is vandal-proof and intended to be placed outdoors as it has moisture-proof double microswitches. As an accessory, there is a complete set with microswitches and mounting details. The protective hood is made of 1.25 mm stainless steel with a brushed surface. They are delivered with mounting holes where the elbow connector can be mounted together with the protective hood directly on the surface. As an accessory for AK, there are also decals for contrast marking in white or black and decals with text doorway

Prox tag PR-4 key fob, Axema

Prox tag PR-4 key fob, Axema

Art. no.: 5870532

Keychain Mifare Classic for VAKA systems, engraved with Axema number (AM) and Mfd number for other systems

Tag touchless black Mifare, Axema

Tag touchless black Mifare, Axema

Art. no.: 5870982

Radio key for A66, A61 and Radio module C18. 1 button 868 Mhz. Elegant design with sliding lid that protects against involuntary button presses. Range depending on external circumstances 5-100 m. The key contains an EM badge with the same identity as the radio.

Showing 52 of 75