Order lines: 0

Ahlsell Products Electric Installation equipment 11-18 13 Motion, time, light controlDali

Dali

Presence detector

Ahlsell helps you find the installation material for all your electrical jobs. Whether you work with commercial properties or private residences, we have the range for your next project. Here you will find wall sockets, cable ladders, and accessories for easy installation. We also offer smart wall sockets, switches, and dimmers from several major suppliers. Modern products for modern solutions. Everything you need under one roof. Explore our wide range of lighting and accessories here in the online store or visit your nearest Ahlsell shop.

Dimmer DALI bcast 128mA DT8 BT

Dimmer DALI bcast 128mA DT8 BT

Art. no.: 1377749

DAL-01 is used to control lighting products via DALI bus with broadcast. The product has a built-in PSU for powering the DALI bus for up to 64 loads, therefore no additional equipment is needed except for a DALI fixture or driver. The product is prepared for tunable white (Device Type 8 DT8) for color temperature control. The DALI broadcast dimmer has two separate inputs for control with spring-loaded push button, motion detector or wirelessly through other products. The product also has built-in time functions such as astro and weekly clocks.

Dimmer DALI bcast 128mA DT8 BT

Presence detector PD-C 360 BMS DALI-2, ESYLUX

Presence detector PD-C 360 BMS DALI-2, ESYLUX

Art. no.: 1301282

Presence detector with 360° monitoring area for ceiling mounting. Can be easily networked and is compatible according to the DALI-2 standard. Universal unit for use together with DALI-2 controls (eg building automation systems with DALI-2 interface) or DALI-2 detector in the room. Integrated PIR sensor for DALI-2 commands according to IEC 62386-303 and light sensor for commands according to IEC 62386-304. Button input for connecting conventional 230 V button. The detector provides button commands as DALI-2 commands according to IEC 62386-301. Surface mounting or ceiling installation with accessories.

Presence detector PD-C 360 BMS DALI-2, ESYLUX

Presence sensor P46MR DALI-2 SnapFit for flush mounting

Presence sensor P46MR DALI-2 SnapFit for flush mounting

Art. no.: 1301388

BMS or secondary sensor, medium range, SnapFit for flush mounting
This presence sensor is DALI-2 certified. Extend the range of a DALI-2 master sensor (353-651321 and 353-651421) or combine it with other P47 or P48 DALI-2 master sensors in the P40/M40 series. The sensor can also be included as part of a DALI-2 BMS system.

Save time on assembly with SnapFit
Niko's unique SnapFit system provides a fast and stable installation in all types of suspended ceilings or fixed ceilings. The sensor is installed easily and quickly with a light turn-and-click movement that saves both time and effort during installation and disassembly. The screwless and easily accessible quick terminals make the sensor easy to install. Cable relief and installation/mounting of the cable cover is done completely without tools.

Reliable range tested to IEC63180
Niko P40 and M40 sensor series have been tested to the IEC63180 standard by third parties in a controlled environment. Automatic repeat tests ensure a reliable range.

Functions
• Range: Ø12 meters at a mounting height of 3 meters
• Adjustable PIR sensitivity (4 levels)
• Settings and configuration can be locked with a PIN code

Easy commissioning
• Communication with the overall BMS system takes place via the DALI bus
• If the sensor is to be used as a secondary sensor, it is connected to the DALI bus of the DALI-2 master sensor. It automatically starts communicating with the master without further commissioning.
• Event log records recently made configuration changes

Timeless design
The sensor has a flat and discreet design, so it blends into the ceiling and fits into any interior. The color can also be easily changed to black by replacing the mounting frame.

Presence sensor P46MR DALI-2 secondary surface mounting

Presence sensor P46MR DALI-2 secondary surface mounting

Art. no.: 1301391

BMS or secondary sensor, medium range, for surface mounting
This presence sensor is DALI-2 certified. Extend the range of a DALI-2 master sensor (353-652321 and 353-652421) or combine it with other P47 or P48 DALI-2 master sensors in the P40/M40 series. The sensor can also be included as part of a DALI-2 BMS system.

Save time on installation and commissioning.
The sensor is designed for surface mounting. The screwless and easily accessible quick terminals make the sensor easy to install.

Reliable range tested to IEC63180
Niko P40 and M40 sensor series have been tested to the IEC63180 standard by third parties in a controlled environment. Automatic repeat tests ensure a reliable range.

Functions
• Range: Ø12 meters at a mounting height of 3 meters
• Adjustable PIR sensitivity (4 levels)
• Settings and configuration can be locked with a PIN code

Easy commissioning
• Communication with the overall BMS system takes place via the DALI bus
• If the sensor is to be used as a secondary sensor, it is connected to the DALI bus of the DALI-2 master sensor. It automatically starts communicating with the master without further commissioning.
• Event log records recent configuration changes

Presence sensor P46LR DALI-2 secondary SnapFit for flush mounting

Presence sensor P46LR DALI-2 secondary SnapFit for flush mounting

Art. no.: 1301404

BMS or secondary sensor, long range, SnapFit for flush mounting
This presence sensor is DALI-2 certified. Extend the range for a DALI-2 master sensor (353-751321) or combine it with other P47 or P48 DALI-2 master sensors in the P40/M40 series. The sensor can also be included as part of a DALI-2 BMS system.

Save time on assembly with SnapFit
Niko's unique SnapFit system provides a fast and stable installation in all types of suspended ceilings or fixed ceilings. The sensor is installed easily and quickly with a light turn-and-click movement that saves both time and effort during installation and disassembly. The screwless and easily accessible quick terminals make the sensor easy to install. Cable relief and installation/mounting of the cable cover is done completely without tools.

Reliable range tested to IEC63180
Niko P40 and M40 sensor series have been tested to the IEC63180 standard by third parties in a controlled environment. Automatic repeat tests ensure a reliable range.

Functions
• Reach: Ø37 meters at a mounting height of 3 meters
• Contains 3 PIR segments each covering 120°
• Adjustable PIR sensitivity (4 levels) in 3 x 120°
• One or more PIR segments can be disabled
• Settings and configuration can be locked with a PIN code

Easy commissioning
• Communication with the overall BMS system takes place via the DALI bus
• If the sensor is to be used as a secondary sensor, it is connected to the DALI bus of the DALI-2 master sensor. It automatically starts communicating with the master without further commissioning.
• Event log records recently made configuration changes

Timeless design
The sensor has a flat and discreet design, so it blends into the ceiling and fits into any interior. The color can also be easily changed to black by replacing the mounting frame.

Presence sensor P46LR DALI-2 secondary surface mounting

Presence sensor P46LR DALI-2 secondary surface mounting

Art. no.: 1301407

BMS or secondary sensor, long range, for surface mounting
This presence sensor is DALI-2 certified. Extend the range of a DALI-2 master sensor (353-752321) or combine it with other P47 or P48 DALI-2 master sensors in the P40/M40 series. The sensor can also be included as part of a DALI-2 BMS system.

Save time on installation and commissioning.
The sensor is designed for surface mounting. The screwless and easily accessible quick terminals make the sensor easy to install.

Reliable range tested to IEC63180
Niko P40 and M40 sensor series have been tested to the IEC63180 standard by third parties in a controlled environment. Automatic repeat tests ensure a reliable range.

Functions
• Reach: Ø37 meters at a mounting height of 3 meters
• Contains 3 PIR segments each covering 120°
• Adjustable PIR sensitivity (4 levels) in 3 x 120°
• One or more PIR segments can be disabled
• Settings and configuration can be locked with a PIN code

Easy commissioning
• Communication with the overall BMS system takes place via the DALI bus
• If the sensor is to be used as a secondary sensor, it is connected to the DALI bus of the DALI-2 master sensor. It automatically starts communicating with the master without further commissioning.
• Event log records recent configuration changes

Showing 6 of 6