Order lines: 0

Ahlsell Products Electric Heating products 85-89 89 Heating cable and controlFrost protection and heat retention

Frost protection and heat retention

Off and connection kits

Water pipe grommeting

Do you work with the installation of heating products such as radiators and heating cables? We at Ahlsell help you find heating products for your assignment. Regardless of whether you work with fixed installation 400V or plug 230V, we have the range. Electrical installations must be carried out by professionals. Here you will find oil-filled radiators, frost protection, mini elements, heating cable, and accessories for easy installation. Smart products from several major suppliers. With your professional know-how in the installation of heating products and good products, the job will be done safely. Explore our wide range of heating products and accessories here in the online store or visit your nearest Ahlsell store.

Thermostat FrostGuard-Eco

Thermostat FrostGuard-Eco

Art. no.: 8581701

FrostGuard-ECO is a plug-in thermostat with a system sensor for use together with the FrostGuard heating cable, for frost guarding pipes. The thermostat has an adjustable settings value (set value) between 0-10 °C. Normally, the set value is set at 3°C. The FrostGuard-ECO enables energy savings of up to 80% in comparison with an uncontrolled system. The thermostat is equipped with an attachment plug and is connected in a grounded electrical outlet. The FrostGuard heating cable is then connected to the thermostat. The FrostGuard-ECO is supplied with an external system sensor with 3-metre attached sensor cable, which cannot be shortened or lengthened. The system sensor is normally placed on the piping, but can even be used as an air sensor, if required.

FrostGuard-ECO is suited for use in apartments, garages, second homes, trailers, in agriculture and gardens, site huts and other temporary installations, frost guarding of condensed water from e.g. heating pumps and cooling devices, but can also be used for the control of other devices which are equipped with electrical plugs. Simple installation: connect the thermostat to a grounded plug, install the sensor and connect the FrostGuard heating cable. Saves energy: provides significant energy saving of up to 80% by way of FrostGuard not being continuously switched on during the winter period. Safety: ensures that the heating cable is not switched on during warmer periods.

Heating cable ETL Frostguard

Heating cable ETL Frostguard

Art. no.: 8946102

FrostGuard is a complete package with ETL-10 self-regulating heating cable for freeze protection of pipes, 10 W/m. The sheath is PVC-free. FrostGuard can be installed both on and inside water pipes. For internal installation, the installation is complemented with a T- or Y-connector. For the T-connector, a watertight lead through is required. This is, however, included in the Y-connector. The heating cable can also be crossed without any risk of overheating.

FrostGuard is supplied in finished lengths, 2–25 m, provided with a plug (IP44) and a 2 meter connecting cable, installation instructions and a universal sign. Minimise the operating costs by installing FrostGuard-ECO together with FrostGuard. Energy savings can be up to 80% compared with an installation without a thermostat.

ETL-10 is the only heating cable available in the market which is S-marked and food-grade approved by SITAC for internal installation in drinking water pipes. It does not release any substances or odd tastes.

Heating cable Frost guard 10

Heating cable Frost guard 10

Art. no.: 8960424

Frost guard 10 prevents damage and leaks caused by frost-burst pipes and water lines.

The heating cable has a pre-assembled plug that is easily connected to a grounded wall outlet via a ground-fault circuit breaker. Common areas of use are sewer pipes, water pipes and water meters in e.g. summer cottages, garages, greenhouses, caravans or boats.

Effectively controlled with Frostvakt Control. The cable is PVC-free and is well suited for drinking water pipes. Type approved for drinking water according to KIWA (approval 1289).

Connection and termination kit for cable type US 12

Connection and termination kit for cable type US 12

Art. no.: 8959090

Connection and termination kit for cable type US 12 HF Defrost Water/Defrost Gutter for Nexan heating cables

Frost protection cable Defrost Water

Frost protection cable Defrost Water

Art. no.: 8956060

Self-limiting heating cable for frost protection of pipes. Defrost Water (US 12 HF) is a self-limiting cable in halogen-free design. The cable can manage frost-protected pipes up to 50 mm in diameter at -25 °C, provided that the pipe is attached with at least 30 mm insulation or buried in the ground at least 50 cm.
The cable can be laid both inside and outside pipes made of plastic, metal, etc. The output is double if the cable is laid inside the pipe. Maximum connection length for 10 A slow fuse (C-characteristic): 100 m outside piping 60 m inside water pipe.

Splice set Universal for Nexans heating cables

Splice set Universal for Nexans heating cables

Art. no.: 8959040

Splice kit for all Nexan types of heating cable.

Waterproof bushing R15/R20 for Nexans heating cables

Waterproof bushing R15/R20 for Nexans heating cables

Art. no.: 8959095

Straight guide for Defrost Water cables and kit, to ensure a waterproof installation for installation in pipes.

Frost protection cable a-collection

Frost protection cable a-collection

Art. no.: 8935025

Pipe freeze protection is used in spaces that are unheated or have a tendency to freeze in winter. The freeze protection cable protects water pipes in summer cottages, wells, work sheds, barns, stables, cold garages, suspended foundations and other spaces or plants. It is completely free from PVC and lead and is therefore the best alternative from an environmental point of view. Approved for both external and internal pipe installation.

The cable is self-regulating and automatically controls the output according to the ambient temperature. It gives somewhat more output in internal installations compared to external and manages to freeze-protect pipes up to 50 mm at -25°C, provided that the pipe has at least 30 mm insulation or is buried at least 50 cm deep. For internal installation, a watertight lead through is used (Part no. 8935000) which is ordered separately. Output: 10W/m at +5°C in metal pipe.

The cable must, irrespective of length, always be connected to 230 V and protected by a 30 mA earth fault breaker. It has a homogeneous self-regulating core for optimum heat conduction. A multi-purpose braid for optimum electrical protection and excellent insulation properties. Plug IP44 and 2 m connecting cable. Approved by Semko for installation in pressurised drinking water pipes.

Self-limiting heating cable ETL for frost protection of pipes

Self-limiting heating cable ETL for frost protection of pipes

Art. no.: 8946000

ETL-10 is a self-regulating heating cable for the freeze protection of pipes, 10W/m. The outer jacket is PVC-free. The installation is simple and the heating cable can be installed both on and inside water pipes. Max installation length: 60 m internally, 100 m externally. ETL-10 is supplied in running metres on a drum, up to 305 m, and can be cut to the exact desired length. Thereafter a connection and termination kit is fitted. The heating cable can also be crossed without any risk of overheating.

ETL-10 is intended for permanent installation with thermostat T2TraceTemp, earth fault breaker and an external sensor. Energy savings can be up to 80% compared with an installation without a thermostat.

For internal installation, the installation is complemented with a T or Y connector. For a T-connector, a waterproof lead through is also required. This is, however, included in the Y-connector. Complement with an earth fault breaker. ETL-10 is the only heating cable available in the market which is S-marked and food-grade approved by SITAC for internal installation in drinking water pipes. It does not release any substances or odd tastes

Accessories for self-regulating heating cable ETL och T2RÖD

Accessories for self-regulating heating cable ETL och T2RÖD

Art. no.: 8949005

Crimping kit for ETL10 and T2Red heating cable. Contains heat-shrink tubing, vulcanising tape and installation instructions.

Accessories for self-regulating heating cable ETL och T2RÖD

Frost protection of pipes, interior pipe laying complete with assembled seals

Frost protection of pipes, interior pipe laying complete with assembled seals

Art. no.: 8977147

Environmentally friendly heating cable for the freeze protection of pipes and hoses.
The cable is installed internally in pipes or hoses. A power output of 9W/m manages to freeze protect pipes max 40 mm with 40 mm insulation down to -35°C.
Complete with seal for 1" and 3/4" T-pipes.
Suitable control is performed with a Devireg 610 or Devireg 330 thermostat, found under the heading Thermostats.
The package contains 1 heating cable with 2.5 m cold cable, installation instructions and 1 sign.

Y-connectors for heating cable

Y-connectors for heating cable

Art. no.: 8949051

Y-Connector, 45 degrees. A watertight, conical lead through is included, tested for pressures up to 16 bar.

Bushing for heating cable ETL and FrostGuard

Bushing for heating cable ETL and FrostGuard

Art. no.: 8949008

Waterproof conical bushing, R20, for positioning ETL heating cable and FrostGuard heating cable system inside the piping. The bushing creates a waterproof seal around the cable and is tested for pressures up to 16 bar.

Frost detector Control IP44

Frost detector Control IP44

Art. no.: 8580113

With Frostvakt Control, you can protect against frost energy-efficiently and economically. Frost Guard Control regulates that the heat is only switched on when the ambient temperature approaches the freezing point. Used with advantage together with Frostvakt 10 and 25 but is also suitable for controlling other products in frost protection and keeping warm. Activation temperature +3 ° C. 3 m mounted sensor cable.

Frost protection cable F-10

Frost protection cable F-10

Art. no.: 8960460

F-10 has been improved with a time-tested aluminium shield that is a snap to install, yet robust. With the new complete Silikon connecting/terminating set, no heat gun is needed to install the cable. Instead, adhesive is used, so the installer need not perform any so-called “hot work". The F-10 has been improved with a new screw fitting with an oval gasket fitted to the shape of the cable. This makes the screw fitting’s seal optimal and secure.

Heating solution approved for drinking water: The new F-10 and accessories are great for installation in pipes and drinking water lines. This is due to their drinking water approval in accordance with the requirements of KTW and NSD/ANSI Standard 61. The F-10 and accessories thus make up a heating system approved for drinking water, and with all parts adapted to work perfectly together.

Connection and termination kit F-10

Connection and termination kit F-10

Art. no.: 8960408

Complete connecting/terminating set for installation of F-10. Heating cable sign included.

Connection and termination kit silicone

Connection and termination kit silicone

Art. no.: 8960419

With complete Silikon connecting/terminating set, no heat gun is needed to install the cable. Instead, adhesive is used, and you avoid “hot work". Heating cable sign included.

Supplementary kit F-10, seal

Supplementary kit F-10, seal

Art. no.: 8960410

Supplementary kit used for internal laying of Ebeco F-10 and has an oval gasket specially suited to the cable’s shape, which makes the screw fitting’s tightness optimal and sure.

Schuko adapter for BHS

Schuko adapter for BHS

Art. no.: 2403033

Series connection adapter that facilitates series connection of BHS cables. Only a series connection of two equally long BHS cables deliver 25% of the total power.

Schuko adapter for BHS

Cable entry, a-collection

Cable entry, a-collection

Art. no.: 8982526

Waterproof bushing, thread R15 / 20, for a-collection antifreeze cable.
Applies only to the series: 8982502-8982525

Waterproof bushing R20

Waterproof bushing R20

Art. no.: 8935277

Waterproof bushing set in R20 dimension for a-collection frost protection cable. Bushing for R20 / R25 included.
NOTE! Must be lubricated during installation with associated lubricants provided with the product.

Y-coupling with pressure nipple and gasket

Y-coupling with pressure nipple and gasket

Art. no.: 8960420

Y-coupling with PEM couplings of brass for internal installation of heating cable in, for example, water pipes. Pressure nipple and gasket for F-10 / Frost guard 10 included.

Showing 22 of 22